Product Details:
Material | Al-Mg Alloy |
Brand | Weiber |
Power Requirements | 220/230V, 50/60Hz |
Electricity | 1 phase or 3 phase as requested |
Test Space Volume | 50Lt. to 2800Lt. |
Temperature Range | -70 deg C to +190 deg C |
Temperature Fluctuation | +-1 deg C |
Temperature Change Rates | 5 to 20 K/min |
Humidity | 10 to 98%RH |
Humidity Deviation | +-1% to +-3% |
Temperature Sensor | PT-100 |
Temperature Controller | HMI+PLC |
Display | LCD |
Automatic Temperature Setting | Yes |
Plate Size | 800mm X 800mm (customizable) |
Horizontal Guidance | Hydraulic Bearings |
Load Capacity | 45-60kg |
Acceleration | Over 20 grams |
Special Features:
Product Details:
Rated Maximum Force | 100kgf-700kgf |
Shock Force | Double Of Sine Force (Triple Optional) |
Maximum Velocity | 1.8m/s (2.5m/s Optional) |
Maximum Displacement Peak To Peak | 51mm |
Armature Resonance | 2800 Hz(+-5% Of Bare Table) |
Frequency Range | 1 to 3200hz |
Vertical Load Support | 300kg |
Bare Table Acceleration | 90 'g' |
Armature Diameter | 240 mm |
Armature Mass | 10 Kg |
Power Requirement | 3 Phase, 230v, 50Hz |
Cooling System | Air Cooled |
WEIBER has designed customized Vibration test system to meet the generalized testing requirements of various segments of industry and research institutions like Automobile, Electronics, Telecom, Lighting,Aerospace, Packaging,DRDO and Atomic research centre.
We are manufacturer of electrical vibration series products, adopted the ''double-magnetic circuit ‘ can be completed in X, Y, Z three axis sinusoidal vibrationtest and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test.
Features:
Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
Rocker Rod roller bearings straight and import-orientedcomposite body stiffness Orientation, eccentric load capacity.
Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
Advanced technology move around the system to ensure that the dynamic circle of high reliability.
New duct design and enhance the cooling effect.
Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
Separately or simultaneously achieve three-axle vibration
Achieve Sinusoidal, Random, Shock, and special waveform
Three-dimensional synchronous and asynchronous vibration
Use of special high-precision guidance to ensure adequate backward stiffness and ultra-low coupling
Light armature, optimal design, strong resistance to vibration
Trunnion air bag with effective pneumatic isolation
Internal air bag support with large load capacity, good low-frequency performance
Dual Field Coils design, low magnetic flux leakage, uniform magnetic field
Can be configured with slip tables
Sine, Random, and Shock tests in three orthogonal directions
Highly efficient cooling blower with low noise 19.Highly efficient and reliable power amplifier
Product Details:
Plate Size | 800mm X 800mm (can be made till 3500mm X 3500mm on request) |
O Material | Al-Mg alloy |
Horizontal Guidance | Hydraulic Bearings |
Drive Bar | Bull Nose |
Mounting Inserts | 100mm X 100mm matrix pattern,SS replaceable inserts. |
Vibration tests in three orthogonal directions can be achieved with the connection of a slip table with an electro-dynamic shaker. A slip table uses a smaller carrier (table) to improve the quality of the overall load capacity, capable of supporting big size and large mass of the payload. A slip table can be categorized into combo and standalone types according to the way of connection. A vibration system with a slip table can complete vibration tests for a component or a whole machine in X, Y and Z directions. It can also form an integrated environmental testing system with the use of temperature, humidity test chamber. We are capable of manufacturing super large slip tables, such as the 3.5m by 3.5m etc.
Combo Slip TableCombo slip table refers to integral design of a horizontal slip table and a shaker. They share a same pedestal.
It has a good rigidity, and is easy to install and adjust. Its installation does not need a special foundation base unless the shaker was required to start testing from 1 Hz. A horizontal slip table with hydraulic Bearing Guiding consists of a Slip Plate (magnesium or aluminium), Drive Bar (or Bull- Nose), Granite Slab, a built-in Low Pressure Oil Source and Pedestal (or Slip Table Base). Built-in oil pump with compact structure is easy to operate.
Standalone Slip Table
Standalone type design is used widely for testing large-size and dynamically complex test samples. Its transportation, lift and loading are easy and its use is more flexible. Besides, the standalone slip tables are welcome by these customers who have a shaker without a slip table.
BT Series - Journal Hydrostatic Bearing
A slip table with Journal hydrostatic bearings consists of a Slip Plate (magnesium or aluminium), Drive Bar (or Bull-Nose), Granite Slab, a Stand-Alone High-Pressure Oil Source and Pedestal (or Slip Table Base). Journal hydrostatic bearings can provide higher resistance to overturning moment, suitable for testing a large sample load. The more the number of hydrostatic bearings, the greater the resistance to overturning moment.
Easy to operate
Unique trunnion makes horizontal and vertical switching easier and more convenient. For medium and larger thrust shaker, worm wheel mechanism makes switching more effortless.
4.6/5
Reviewed by 11 Users
Most Relevant Reviews