|Hydraulic Control||Flow Meter|
|Water Supply System||Booster Pump|
|Drip Mold Height||200~2000mm|
The drip box testing chambers from Weiber are rain test machines used for testing the outer protection of signal devices, external lighting equipments and car lamps etc. The equipment finds widespread usage in electronics industry and automotive and aerospace industries and is commonly employed for quality testing of products. The test chamber comprises of the guiding upright column, a drip mold, a rotating sample table with adjustable speed and a level meter to allow observation of the level in the drip mold. The equipment uses high quality construction materials for a sturdy construction and is designed for safe and reliable operation. The guiding upright column is made up of high-quality, plastic coated square steel pipe, whereas the drip mold is made up of high-quality stainless steel finish plate undergoing knurling.
The Weiber drip box testing chambers come equipped with a specimen turntable that can be wheeled in and out from beneath the drip box to allow easy placement of the test specimen. The base of the turntable has a height of 500mm and rotates at around 1 rpm. The height of the drip box can also be electronically adjusted up to 2500 mm or 2000 mm above the turntable. The equipment comes with a choice of three drip box sizes and features a fully enclosed drip box and water system. It is also equipped for filtration of pollutants and fine sediments, therefore minimizing any chances of clogged nozzles. The stainless steel nozzles are completely adjustable and can be easily removed for cleaning and replacement. These test chambers are also provided with a stainless steel water tank with pump and filter to ensure continuous supply of clean and filtered water within the equipment. They feature easy-to-use touch screen controllers for setting the water pressure to the drip box.
The Weiber drip box testing chambers are designed in accordance with international standards of safety and quality and are compliant with GB10485-89 GB4208-93 GB/T4942 and corresponding ISO, IEC and ASTM standards, ensuring maximum accuracy and reliability of the test results. They are stuffed with user friendly features, facilitating ease of use and are designed for long-lasting operation and consistent performance.
|Power Requirements||415V,50/60Hz,3 phase|
|External Dimension||6500 x 6500 x 4000 mm|
|Internal Dimension||6000 x 6000 x 3500 mm|
|Diameter of Nozzle||6.3 mm dia (for IP65),12.5 mm dia (for IP 66)|
|Rain Spray Nozzle||4 Nos.|
|Spray Pressure||0-400Kpa (adjustable)|
|Spray Volume||12.5 - 100 L/min|
|Distance Between Specimen And Nozzle||3 m|
|Temperature Fluctuation||+-1 deg C|
|Humidity||20 to 98% RH|
|Humidity Deviation||+-3% RH|
|Auto Stop Facility||Through HMI|
|Nozzle Operation Facility||Through HMI|
Weiber designs and manufactures standard as well as customized water spray test chamber for evaluating various automotive, electrical and electronics items under water, rain or shower conditions. The chamber interrogates the performance of parts when subjected to water droplets.
The system is based on the IP X5, X6 specification requirements, and can also accomplish individual automaker’s tests, as well as electrical-enclosure tests.
Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range.
|Dimension of the Chamber||Dia 500 mm,Height 1200mm|
|Construction of Chamber||Complete Corrosion Resistant Stainless Steel|
|Thickness of Stainless Steel||15mm|
|Water Pipe Diameter||0.16 mm|
|Spraying Aperture Diameter||0.04mm|
|Flow Rate of Water||0.07 L/min|
|Pressure Range||0-500 KP|
|Water Temperature||Room Temperature|
The IP X7 and IP X8 test equipment simulates the water immersion environment to test the water resistance and sealing of the samples during storage, transportation and usage. It is widely applied to electrical and electronic products, lamps and lanterns, electrical cabinet, electrical components, automobile, motorcycle and its spare parts and other products. It provides the basis to improve the performance of the products.
|Workroom Dimensions||80x80x80 mm,102x120x100 mm|
|Swing Pipe Diameter||0.4m,0.6m,0.8m,1m|
|Spraying Hole Diameter Certificate||0.4mm|
|Test Bench Rotation Speed||1r/min,or step less speed regulating|
Reviewed by 11 Users
Most Relevant Reviews