Pharmaceutical Equipments

Product Details:

Clean Stoker for Clean Room is designed to maintain the cleanliness integrity of clean room garments during storage. It can effectively purge and remove particles such as lint and dust ingress on the clothing fabric.

 

Applications:

• Electronic Industry
• Pharmaceuticals
•  Food Processing
• Chemical

Clean Room Stoker features a quiet, direct drive, variable- speed blower mounted above a HEPA filter rated 99.99%0.3m, and delivers a continuous downstream that block the inrush of contaminants into the storage area, as a result, helps garments virtually free of particulates. Door of the scientific equipment is made available to make movable and curtain type. Available to change the ventilation rate needs. It has acquired Quality Process Certifications of ISO13485.

Product Details:

Weiber Dynamic Pass Box are self-contained units installed at the entrance to clean rooms. They minimize the amount of particulate contamination and is easy to install and adaptable to existing facilities. These boxes operate on the principle of one door opening at a time with electromagnetic interlocking so as to avoid any possibility of cross contamination.

 

Dynamic Pass Box assists in transfer of materials driven through a controlled environment but without much personnel movement. Furthermore, this box helps in prevention of contaminants entrance either in the clean room or between various classified areas. The pass box also known as Clean Room Pass Box.

 

Special Features:

• Two Stage filtration
• Available in powder coated Mild Steel, SS 304 / SS 316/ SS 316 or a combination of both.
• Finish - Matt finish
• Confirms to GMP norms
• Mechanical or Electromagnetic Interlocking
• Floor and wall mounted design
• Maximum chemical resistance construction
• Modular & economical
• Corrosion resistant
• Aesthetically designed

 

Operating Principle:

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.

 

Construction Details:

Our tailor made unit has double walled construction and is available in powder coated Mild Steel, SS 304 / SS 316/ SS 316 or a combination of both.

 

The internal side walls of the pass box are constructed from a single piece of stainless steel, with coved corners for easy cleaning.

 

Each hinged door in our pass box has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electrically interlocked type, so that any one door can be opened at a time.

 

Durable feather edge rubber gasketed door seals maintain cleanroom integrity and are easy to clean.

 

UV & fluorescent light and HEPA filter are provided


Applications:

• Space applications
• Life science
• Chemical industry
• Bio medical
• Diagnostics labs
• Pharmaceutical industry

Product Details:

Clean Booth is a portable Clean room system equipped with HEPA Fan Filter Unit, it generates stable and ideal laminar air flow inside. This unit can provides high cleanliness (ranging from Class 100 to Class 10 000) partially in the clean room with excellent flexibility for the various demands of job process conditions. The custom Mobile Clean Room Booth & air tent panel offers unmatched prices, usage and specifications for various research laboratories. The Clean Room Tent offers application in pharma industries (to maintain GMP), Operation theatres, Horticulture, Tissue culture and bio fertilizer labs, Space research, Food processing industries etc.

Standards Compiled:

• SO 4043:1998
• Customer defined

Salient Features:

• Low installation cost, modular design for fast and easy assembly.
• Can achieve class 100-10,000 cleanliness with easy assembly
• Can be set up by modular for larger clean environment area.
• Compact design, light weight complete with castor wheel for mobility, four sides vinyl transparent curtain.
• Energy saving design for purpose of localized clean environment.
• Economical
• Easy installation
• Ionizing bar neutralizes surface charges to prevent electrostatic discharge
• Casters enhance portability
• Corrosion resistant
• Microprocessor based controls
• Sturdy construction

 

Construction Details:

Framework:
The rooms are freestanding and fabricated of steel with welded gusset plates on each leg support to insure rigidity. Our exclusive rafter ceiling system allows rooms to span without need of internal legs. All framework has an electro-statically applied powder coat finish.

Ceiling Grid:
Consists of anodized aluminum hat and zee shaped extrusions that are formed to fit steel frame. One inch anodized tees make up cross sections creating a leak free ceiling system.

Ceiling Panels:
panels manufactured of high density formed fiber core covered with a white vinyl membrane. Tiles are durable, easy to clean and offer both humidity resistance and high light reflection.

Curtains:
clear solid vinyl curtain hung to an appropriate height around perimeter of clean room to maintain proper pressurization. Various types of entry/exit systems are offered to best suit personnel/product flow. (overlaps, strips, bi-folding or dual-flex self-closing doors.) Curtains are easily mounted to steel frame by our one piece white PVC mounting track. Simply hook curtains on to track and close the continuous cover. This sleek non-corrosive design creates a tight seal to frame work that prevents contamination from entering the clean room.

HEPA Fan Filter Modules:
HEPA filter efficiency to be 99.99% at 0.3 microns and produce 720 to 800 c.f.m. or an average velocity of 90 f.p.m.

Electrical:
A prefabricated wiring system is supplied to speed up installation and reduce wiring costs. Assembly personnel just plug electrical components together so an electrician is only needed to connect power to a single point junction box. What makes this system completely user friendly is a leg mounted control box with separate on/off switches for HEPA filters and light fixtures.

Product Details:

An Ozonator is a device that creates ozone gas. This equipment is used to kill bacteria & viruses. Ozone gas is a very strong oxidizer and disinfectant, which is commonly found in nature. Ozone is produced by ultra violet light, lightning (corona discharge) and almost any electrical discharge. This equipment is equipped with transformer for high voltage output and cool operation.

 

Weiber ozonator are for making the air free from pollution. Its main function is to clean indoor air and prevent air pollution in an easier way.

 

Air ozonator reduce indoor bacteria, allergy, asthma, hay fever, home respiratory problems, mold source, odors, pollutants, pollution. It controls air contaminates like bacteria, bad odor, formaldehyde, germs, pathogens, and virus. Air ozonator improve the air quality by reducing many indoor pollutants that filters alone are unable to trap. Weiber Air Sterilizer is simple to maintain and their compact design with convenient carrying handle make them comfortably portable.

 

Sailent Features:

• Non-Conductive electrical enclosure
• Transformer for high voltage output and cool operation.
• High ozone production and cool operation
• Restricts the breeding activity of viruses.
• Enclosed structure to prevent secondary pollution.
• It adopts special purification fan with large air flow rate and low noise.
• Germicidal agent automatic failure detecting and warning function.

 

Applications:

• Packaged Drinking Water
• Water Treatment Sewage
• Swimming Pool Treatment
• Textile Effluent Treatment
• Food & Beverage Industry
• Pharmaceutical Industry
• Bleaching Paper & Pulp
• Landscape Architecture
• Hotel Industry Laundry Water Treatment

Product Details:

Weiber offer easy solutions to control your dust and vapor in the form of Down Flow Booth. Our equipment is designed to protect workers from breathing unsafe levels of particulates during material handling operations. Air flows from the booth ceiling, down across the operator’s head, and into a grille below the operator’s waist level, thereby drawing particulates away from the operator’s breathing zone. Weiber designs both standard and customized downflow booth for clean room application. The containment booths are economical and offer unmatched usages and specifications.

Weiber tailor made Down Flow Containment Booth are engineered to provide high levels of personnel protection, with the flexibility to enable a multitude of process operations to be carried out. The product also known as Powder Containment Booth and Downflow Containment Booth.

 

Special Features:

• Powder handling or tipping requirements
• Electrical wiring to client standards
• Digital thermo regulator
• Physical Barrier by antistatic PVC curtains
• Provide Operator Exposure Levels (OEL's) ≤100 micrograms/meter3 over an 8 hour Time Weighted Average (TWA).
• Modular, easy-to-clean rigid design with minimal joints.
• Single, Two-Stage or Three-Stage HEPA/ULPA filtration can be accom
• Total exhaust airflow.
• Built-in cooling coils to offset booth temperature rise.
• Ports for computers, screens, printers
• Entry and exit airlocks.
• Corrosion resistant interior and exteriors
• Sturdy construction

 

Construction Details:

Weiber down flow booths are constructed from stainless steel in fully ducted designs and utilize dedicated air supply and exhaust fan sets, both are normally fitted with input and exhaust filtration systems to HEPA standards (99.99% filtration performance).

 

Applications:

• Pharmaceutical
• Chemical
• Agri-chemical Companies
• Dispensing of Raw Materials
• Chemical Industry

 

 

Product Details:

Dispensing/Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardous drug powders. Air is pulled away from user thru rear-wall pre-filters, trapping powders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth and Pharmaceutical Dispensing Booth.

 

Special Features:

• Designed in accordance with WHO-GMP.
• 3-Stage Filtration like Prefilter , Fine Filter , HEPA filter .
• Heavy duty Low noise motor blower assembly .
• Suitable to accommodate to floor & table top for keeping weight machine5. Negative pressure inside the booth prevents the escape of fine powder from the work area.
• Fully integrated system.
• Easy installation & economical.
• Stainless steel AISI 304 structure.
• Dynamic gasket to guarantee the perfect sealing of the filters.
• Down cross is equipped with N°3 fans with AC frequency control.
• Corrosion resistant exterior and interior.
• Sturdy construction

 

Operating Principle:

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.

 

Construction Details:

All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice.

• G.I. with Powder Coated finish.
• Fully Stainless Steel with satin finish (Gr-304 / Gr-316)
• polycarbonate curtains

 

Applications:

• Product Dispensing
• Large scale dispensing & weighing
• Pharma industry
• Dispensing of raw materials
• Chemical industry

Product Details:

We are manufacturers of air curtains in India, since 1990. Our commercial air curtains are widely used in a variety of industrial and laboratory set ups, where protection form dust is crucial. Our air curtains are gaining popularity in upcoming pharma industries, college and research laboratories, electronic circuits and semi conductor manufacturing units, computer labs, cold storage, show rooms, restaurants and various other industries.

We specialize in both standard as well as customized air curtain models, specially designed to meet the challenging demands of various basic and applied science laboratories and manufacturing set ups. Over a short period of time Weiber brand has been established as reliable manufacturers and exporters of air curtain in India.

Apart from marketing overseas, we are also supplying our air curtains in India, catering to a variety of customers ranging from Defence Installations, research institutes and various R and D laboratories.

 

Sailent Features:

• Our air curtains are quite and have a very low vibration effect ensuring unnoticeable presence and operation in any installation.
• It gives excellent protection from dust and other unwarranted particles suspended in air from entering in the work area and works as an invisible air barrier.
• Reduces air conditioning cost and increases the efficiency of the cooling units.
• The drafts are reduced on installations of our air showers, thus increasing the energy efficiency of the building.
• Air velocity of our air curtains are customized for different applications and it can be optimized to prevent/reduce the entry of dust, pollen grains, insects etc without disturbing the occupants of the premises.
• Elegant design, super style and ease of installation makes our air curtains very popular in different quarters of our market.
• Our air curtains are equipped with super quality crompton motor to ensure long and reliable life span.

 

Outer body of our air curtains are made of thick PCRC sheet, duly pre-treated with primers and painted with attractive air drying paint or powder coated. Energy efficient heating elements made out of high grade Kanthal A-1 wire are placed in tandem with heavy duty cross flow fan coupled with a superior low noise motor, which ensures a smooth performance with minimal hindrance and turbulence.

Our air curtain is developed as horizontal fixtures and is mounted on the ceiling which ensures space optimization.

 

Construction Details:

This feature enables them to be used as air screens where there is very small room between the doors and ceiling. Our air showers can be flush mounted or concealed in false ceiling or suspended by means of metal rods or ropes.

Product Details:

Pass Box aids in the material transfer without much personnel movement. Furthermore, the Static Pass Box also acts as a hindrance for entrance of contaminants in clean room and other classified areas.Weiber pass box static is designed to minimize traffic and contamination entry into the clean room. Our Clean Room Pass Box comes under the international standard and is used for transferring the material form one clean room to other clean room.

Static Pass Box is an inexpensive way to maintain the cleanliness of your clean room. These boxes operate on the principle of one door opening at a time with electromagnetic interlocking so as to avoid any possibility of cross contamination. With stainless steel coating and rigid base these tailor made equipment provide optimum performance. They are available in Stainless Steel Construction with interlocking arrangement, with built in HEPA/ULPA air barrier.

 

Special Features:

• Abrasion-resistant epoxy-coated steel
• Easy to clan stainless steel base
• Wall grouted modules
• Floor and wall mounted design
• Maximum chemical resistance construction
• Easy installation & Economical
• Swing type doors
• Electro-magnetic Interlocking
• UV light
• Built-in air shower significantly reduces surface contamination on materials entering or exiting the controlled environment.
• Materials entering or exiting the controlled environment are “scrubbed” by high velocity HEPA/ULPAfiltered air jets with velocities of 25 m/s (4921 fpm).
• An array ofstainlesssteel nozzles direct high-velocity jets.

 

Construction Details:

• The unit is made of stainless steel.
• The internal side walls of the pass box are constructed from a single piece of stainless steel, with coved corners for easy cleaning.
• Each hinged door in our pass box has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electrically interlocked type, so that any one door can be opened at a time.
• Durable feather edge rubber gasketed door seals maintain cleanroom integrity and are easy to clean.
• UV & fluorescent light and HEPA filter can be are provided

 

Applications:

• Space applications
• Life science
• Chemical industry
• Bio medical
• Diagnostics labs
• Pharmaceutical industry

 

Product Details:

The Air Cleaner from Weiber are designed for efficient removal of air pollutants such as disease causing bacteria and viruses, dust, pollen, mould, spores, dust other allergens from the indoor air. Our Clean Room Air Purifier offer six-stage filtration for maximum purification efficiency. They are capable of eliminating larger contaminants, as well as the tiny ultra-fine particles from the air we breathe. The equipment uses aluminum static plasma filters with more than 99.9% efficiency for removing dust particles and HEPA filters with a purification efficiency of more than 99.99% for removing drifting dust particles, pollen grains and germ particles even as small as 0.3 microns in size. these are also equipped with activated carbon for the elimination of harmful gases and a TiO2 semiconductor photo catalyst that effectively restrains the activation of viral particles. The ionizer purifiers of Air Cleaners generate electrically charged ions that aid in the removal of airborne particles, whereas UV lamps produce ultraviolet radiations for maintaining antimicrobial conditions within the working area. Weiber manufactures and supplies both standard and customized electronic Air Purifier with lowest prices, standard specification and universal usage for pharmaceutical industries.

 

Standards Compiled:

• BS 5415-2-2.2:1986
• BS 5415-2-2.2:1976

 

Special Features:

• UV Lamp: The UV lamps are appropriately placed within the air cleaner to prevent the growth and accumulation of microorganisms in areas that may be partially shaded from the UV light.UV irradiation has microbicidal properties, often providing a sterilization rate of more than 97.6%
• HEPA filters: highly efficient at removing dust particles, pollen grains and germs with a purification efficiency of more than 99.9%.
• Aluminum Electrostatic Plasma Filter: leads to the formation of a static electric field that causes ionization of particles and their subsequent removal. Washable and reusable aluminum filters to reduce the cost of operation.Purification efficiency of the filter is more than 99.9% at removing dust particles and other air borne contaminants.
• Activated Carbon: adsorbs the volatile chemicals and harmful gases, facilitating their removal from the indoor air.It provides an adsorption area of more than 700,000 square meters.
• Ionizer purifiers: facilitate electrostatic precipitation of charged particles, therefore reducing the contamination levels. 4 easy to clean carbon fiber heads are used for continuous generation of high density ions.
• Photo catalyst: use of TiO2 semiconductors for photo catalytic oxidation of organic contaminants.
• Safety Switch: switches off the unit automatically when the front panel door is open.
• Pollution Sensors: the odor sensors and particulate sensors detect the presence of volatile gases and other airborne pollutants.
• LED Indicators: Indicate the pollution levels in red/yellow/blue.
• Auto Alarms: auto alarms and LED indicators for replacement of UV lamps, HEPA filters and cleaning of aluminum electric static plasma filter.
• Auto Mode: It is controlled by the in-built Samsung IC to set MANUAL / AUTO / TIMER / AIR SENSOR mode according to the specific requirements.
• Power Music and LED color Screen Technology: Pure Zone-651 lays out its enchantment of humanistic technology.

 

Product Details:

Bag in Bag Out Filter System provide a wide performance for preventing the workers from bio-hazard organisms and viruses while they are doing the regular HEPA or ULPA filter replacement work. It is the most effective equipment available for any zone, needing a special critical filtration cleanliness level and negative pressure environment.

Bag in Bag Out Filtration System includes pre-filter (and maintenance access door), HEPA or ULPA filter (and maintenance access door), inlet & outlet connecting duct flange unit, frame and mounting bracket. The equipment is full welded with argon welding except maintenance access door. It can be made not only at workshop but on site also.

 

Magnehelic gauge becomes standard for pre-filter, and ULPA or HEPA filter.

 

Construction Details:

• The housing is made from either T304 12 & 14-gauge stainless steel or optional T316 12 & 14-gauge stainless steel.
• The locking trays are made from T304 12-gauge stainless steel or optional T316 12-gauge stainless steel.
• Retrieval rods ease the removal of filters.
• Seam welding reinforces strength and prevents leakage.
• Door(s) have perimeter gasket in order to ensure a positive seal.
• Door knobs are cast aluminum.
• Inside each unit’s door(s), a ribbed inlet collar provides for a PVC bag attachment. The PVC bag creates a barrier seal between service personnel and the contaminated filters. With this design, filter-servicing personnel are not in direct contact with any threatening particulate. An initial bag kit is included with each order.
• Depending on end user requirements, a variety of prefilter, adsorber, and/or HEPA filter sections are incorporated into the unit. Housings may be joined in series or parallel. Test sections in series may also be incorporated with the housing. Specific fan filter combinations are also available for isolation room systems.

 

Applications:

• Radiological Contamination
• Pharmaceutical and Biotechnological Clean Rooms
• Medical Device Clean Rooms
• Microelectronics Nanotechnology
• Hospital Suites
• Isolation Areas
• CBR Applications

Product Details:

Weiber manufactures Industrial Dehumidifier to reduce the level of humidity in the air, usually for health reasons. Pharmaceutical Air Dehumidifier are also used in industrial climatic chambers, to control relative humidity within certain rooms to stay at levels conducive to processing of products. Air Dehumidifier are designed to suit unique moisture/humidity control needs during processing, packaging, drying and storage. It employs unique Zexter-00908 technologically advanced dehumidification coil which has the ability to extract maximum amounts of moisture under difficult conditions. It prevents the growth of unsightly fungi and improves the quality of the air. It's also known as Clean Room Air Dehumidifier.

 

Salient Features:

• Microprocessor controlled System
• Extremely Silent
• Defrost automatically when the ambient temperature is below 18 deg.C.
• Backward air outlet
• Adjustable air direction & portable
• Non-touch point tank full switch
• Corrosion Resistant Casing
• Easy to remove desiccant rotor
• R-134a CFC-Free Refrigerant
• Power Reciprocating compressor
• Electric, steam, direct or indirect fired gas reactivation
• Cleanable or disposable 30% inlet air filters
• Easy installation & economical

 

Operating Principle:

Industrial Dehumidifier Systems are on the job where control of humidity and moisture is critical in various industrial applications. Our unique Zexter-00908 technologically advanced dehumidification coil has the ability to extract maximum amounts of moisture under difficult conditions. With the addition of the optional remote condenser, our industrial Dehumidifier will provide cool dry air to the conditioned space. An automatic change over thermostat allows the system to maintain the desired room temperature whether summer or winter. The operation of the industrial application dehumidifier is completely automatic. A humidistat starts the dehumidifier upon a build-up of humidity in the room and stops when the set point is reached.

 

It does this by condensing water onto a cold surface. A fan is used to speed up the process. It blows warm air onto cold metal coils, and the resulting water drips into a water collector. The resulting cold air is then passed over warm coils to bring it back to room temperature. The air is then reheated and sends back to the room.

 

Applications:

• Dry Air Storage (Multi Purpose): In dry air storage dehumidifier keeps the relative humidity at the desired level all year round regardless of the temperature. Basic dry air storage only requires an un insulated, reasonably airtight, building fitted with a dehumidifier. Steel and other metals, wood, paper, pulverized products, military equipment are just a few examples of items possible that can be stored safely and at low cost.
• Production Facilities (Pharmaceutical): Weiber dehumidifiers make it possible to produce pharmaceutical products all year round in a controlled dry atmosphere. These dehumidifiers increase production capacity in spray dryers and fluidized beds that are used, for example, in the food industry. Breweries can avoid mould and condensation on cold surfaces by using dehumidifiers .
• Archives: Archives for photographic film must be kept at low temperature and at low relative humidity, typically + 2 ºC, 30% RH. A controlled climate with stable relative humidity is also vital to prevent art collections, old documents, textiles, books etc from being damaged by the ravages of time.