Product Details:
Brand | Weiber |
Range | 0 to 14 pH Continuous |
Resolution | 0.01 pH |
Accuracy | + 0.01 pH + 1 digit (relative) |
WEIBER water and soil analysis kit is based on advance electronic technology for water analysis, pollution control, laboratory analysis, soil testing etc. The complete unit is housed in a briefcase to work on battery rechargeable cum mains. Unit is supplied without O.R.P. electrode with instruction manual.
(a) Six Parameters :(pH, Conductivity, TDS, ORP, DO and Temp)
(b) Five Parameters : (pH, Conductivity, , ORP, DO and Temp)
(c) Seven Parameters : (pH, Conductivity, TDS, Salinity, DO, Temp. and Turbidity)
Product Details:
Nominal Capacity | 75,00 |
Service Flow Rate | 18 |
Pipe Size | 27 |
Mineral Tank Size | 2" |
Resin Qty | 18"x108" |
Approx | 3 |
Model Number | MB18-PVN/M9060 |
In mixed-bed deionizers the cation-exchange and anion-exchange resins are intimately mixed and contained in a single pressure vessel. The thorough mixture of cation-exchangers and anion-exchangers in a single column makes a mixed-bed deionizer equivalent to a lengthy series of two-bed plants. As a result, the water quality obtained from a mixed-bed deionizer is appreciably higher than that produced by a two-bed plant.
Although more efficient in purifying the incoming feed water, mixed-bed plants are more sensitive to impurities in the water supply and involve a more complicated regeneration process. Mixed-bed deionizers are normally used to ‘polish’ the water to higher levels of purity after it has been initially treated by either a two-bed deionizer or a reverse osmosis unit.
Construction Details:
It consists of an in-built pre filter and very high exchanging capacity non-corrosive CATION and ANION resin columns pre-fitted with imported RESINS for efficient results having treated water parameters conforming to IS- 1069/64. It yields chemically pure water equal to multiple distilled water having a conductivity of less than 10 micro Siemens / cm and pH of 7.5 to 9pH. Fitted with sturdy PVC multi-control valve and connected direct to water taps. The conductivity meter operates on both AC supply and 9.0 V DC battery. Supplied with one plastic chemical proof regeneration tank and the complete unit in housed in a painted M.S. trolley for easy mobility. Available with analogue as well as Digital conductivity meter.
Applications:
Product Details:
Brand | Weiber |
Power | 9V Adapter,220V/50Hz or 110V/60Hz |
Model Number | ACM-MP PHS-25CW |
Weight | 1.5 kg |
Dimension | 210mmx205mmx65mm |
Temperature Compensation Range | 0~99 deg C |
Calibration | 2 points (pH6.86/pH4.00 or pH6.86/pH9.18),NIST Standard Solution |
The Acm-MP-PHS -W series economical microprocessor based pH/mV meter, is ideal for routine use in schools, laboratories and production plants. This microprocessor based table top pH meter is capable of measuring pH/mV value and Ion concentration measurement with an Ion selective electrode.
Key Features: Acm-MP PHS Series Microprocessor Based pH meters
Microprocessor-Based
Based on Advanced SMT technology,
High performance
Excellent Stability And Repeatability
2-point Push Button Calibration
Auto-Buffer Recognition
Self-Diagnostic with Message Codes Display
Automatic temperature compensation
Large LCD Display
Simultaneous display of the measured values( , pH/mV)
Product Details:
Brand | Weiber |
Power | AC-220/20 Volts or 110 Volts or DC9V/300mA |
Conductivity | 0 to 200 mS/cm,be divided into five ranges 0.00 to 20.00S/cm; 20.0 to 200.0S/cm 200 to 2000S/cm |
TDS | 0 to 100 g/L |
pH | 1.99 to 19.99pH |
Size and Weight | 160x190x70mm/880g |
mV | +-1999mV |
Resistivity | 0 to 100 M.cm |
Salinity | 0 to 100 ppt |
Temperature | (-10 to 110) deg C |
Storage Data | 900 groups |
Communication | RS-232 |
The Acm-MP-521 series is advanced microprocessor based multi parameter tester which can test pH, mV, Conductivity, Resistivity and temperature . This multi parameter pH/.conductivity meter is ideal for analytical usages in testing and research , laboratories and production plants. This microprocessor based table is ideally suited for application where multiple parameters have to be gauged with high level of accuracy and data logging for future references and report generation. These type of meters are very well equipped to be used in laboratories as well as for field application
Features And Applications:
Analytical benchtop pH meter cum conductivity meter
RS 232 C Interface
Data Storage of up to 600 sample
Supplied with Software for data logging and analysi
Equips three-in-one pH electrode, fast response and easy to use
Automatic Temperature Compensation Range (-10-100o C)
Self-Diagnostic with Message Codes Display
Key Inclusions:
201T-M plastic pH/ATC three-in-one electrode
Model 602 flexible electrode holder
RS-232 communication software
Measuring Parameters:
pH, mV, Conductivity, Resistivity, TDS, Salinity and temperature
Product Details:
Brand | Weiber |
Weight | 1.5kg |
Calibration Points | 1 point, input figure |
Model Number | ACM-MP-DDS-11AW |
Conductivity Testing Range | 1.999uS/cm, 19.99 uS/cm, 199.9 uS/cm, 1999 uS/cm, 19.99mS/cm, 200.0mS/cm |
Conductivity Testing Accuracy | +-1.5%F.S |
Temperature Testing Range | 0-100 deg C |
Temperature Compensation Range | +-1 deg C |
Coefficient of Temp Compensation | 0~3.9% / deg C |
Electrode Constant | 0.1, 1.0, 10, Adjustable Continuously |
Power Supplier | 9V/350mA adapter, 220V/50Hz, OEM available customizing as per 110V/60Hz |
External Size | 210x205x65 mm |
The Acm-MP-DDS - series economical microprocessor based conductivity meter is ideal for routine use in schools, laboratories and production plants. This microprocessor based table top pH meter is capable of measuring the capacity of ions in a solution to carry electrical current.
Key Features:
Single Point Push-Button Calibration:
Acm-MP-DDS - series economical microprocessor based conductivity meters are equipped with single point calibration function. The meter is permitted to use user-defined solution, You need only set conductivity value of the solution under temperature 25 o C and immerse probe in the solution. Press [ENTER], the meter will calibrated automatically.
Auto-Ranging for Conductivity: Our conductivity meters have auto-ranging function. It will scan the current value and transfer the range, Final measured value will also displayed on the screen in the most precise resolution.
Automatic temperature compensation: Acm-MP-DDS - series economical microprocessor based conductivity meters are equipped with automatic temperature compensation and measurement function, the meter will recognize temperature sensor automatically and measure temperature after temperature sensor connected to the meter. If you connect the conductivity electrode in the same time, it will begin to the automatic temperature compensation.
Adjustable temperature coefficient: Different ion solution usually have different temperature coefficient, setting temperature coefficient correctly is very important to measurement, DDS-W series can be set in the range of 0~3.9%/oC.
Adjustable cell constant: When measuring higher or lower conductivity solution, you should choose conductivity electrode with different constant. There is three electrode (0.1, 1, 10) constant for your choice, you can choose according to your electrode. The meter will display value automatically.
Product Details:
Brand | Weiber |
Operating Temperature | 0-40 Degree Celsius |
Test Object | Seeds |
Test Range | 3~35% |
Repeat Error | Equal or Less than 0.2% |
Test Error | Equal or less than +-0.5% (mainly moisture range) |
Test Time | Equal or less than 10s |
Power Supply | four # 5 dry battery or 220V AC |
Automation Switch Off | The instrument will be switched off automatically if there is no operation within 3 minutes. |
Temperature Compensation | Automation |
Net Weight | 880gram |
We are manufacturers of Seed Moisture Meters/Digital Seed Moisture Meters in India since 1990. We have developed our unique range of seed moisture meter, closely working with leading scientific brains of the country along with specialists of various industries, thus ensuring a high level of accuracy, performance and reliability in all our seed moisture meters. As a result, all our products have a huge acceptance and usages in various agro industries, food processing industries, agriculture universities, post harvest technology institutes, storage godowns and cold storages across India and abroad.
We specialize in both standard as well as customized moisture meter designed to meet specific demands of general usage customers and research oriented applications.
Over a short period of time Weiber brand have developed as reliable exporters of seed moisture meter in India, catering to vast markets in South East Asia, Middle East, Africa and Europe.
Apart from regular exports we are also catering to our domestic market. Our seed moisture meter is in great demand in various research stations, agriculture universities, cold storage and various agro based industries.
Grain Moisture Meter:
Quick
Accurate
Convenient
AC/DC power supply compatible
High-brightness backlight LCD, clear and energy-saving
Multipoint calibration, error correction
Low power consumption
Automatic shutdown
Automatic weighing and temperature compensation
Volume-weight conversion display
Operating Principle:
Our seed moisture meter works on the principle of measuring the electrical conductivity of a given material, bearing a fixed relation with moisture content of the given material, which is measured using a superior solid state technology and displayed on the screen.
Product Details:
Brand | Weiber |
Accuracy | +-1% |
Display Type | LCD Display |
Weight | Approx. 150g (including battery) |
Power | One 9V battery |
Operation Temperature | 0-40 (32 to 104) 0-70%Rh |
Dimension | 126x70x29mm |
Resolution | 1% |
Test Range | 5% to 40% |
Areas of Applications:
Product Details:
Brand | Weiber |
Weight | 300g |
Resolution | 0.1mg |
Accuracy | +-10.00% |
Battery Life | 100 hours |
Model Number | ACM-DO-820 |
Salinity Correction | 0~35g/L |
Barometric Pressure Correction | 450~850mmHg |
Calibration Points | 2 points |
Memory | 48 Data Sets |
Output | USB |
Power | 1*9V Battery |
Dimensions | 185(L)mmx88(W)mmx32(H)mm |
DO Range | 0~20mg/L(ppm) |
DO Accuracy | +-0.5mg/L |
Saturation of Oxygen | 0~200.0% |
Temperature Range | 0.0~100.0 deg C |
Temperature Accuracy | +-0.1 deg C |
Temperature Compensation | 0~40 deg C |
Product Profile: Economical Microprocessor Based Dissolved Oxygen Meter (Acm-DO-820 Series)
The Acm-MP-DDS - series economical microprocessor based dissolved oxygen meter are very accurate and economical DO meters. These microprocessor based DO meters come with single and two point calibration and data hold facility. The most unique feature of these DO meters are that they are provided with USB interface and can transfer the data to computer system in the laboratory and can be attached to various program applications for advanced studies.. The ACM-DO-820 series DO meters have automatic correction for barometric pressure and salinity. This equipment is unique for the use in college laboratories, research laboratories, water treatment and industrial application.
Features:
Microprocessor based
Single or Two points automatic calibration
Hold function
Automatic temperature compensation
Auto-Power Control
Adjustable barometric pressure and salinity correction
Automatic messages
Expanded memory stores and recall up to 48 Data Sets
USB interface and application software
Large LCD display
Applications:
College Laboratorie
Research Laboratorie
Water Treatment
Industrial Application
Product Details:
Brand | Weiber |
Light Source | LED |
Test Tubes | 2x25cm glass tube |
Power | Optional including mains AC electricity supply ( 220 V) 4 AA alkali batteries |
Working Environment | 0-50 deg C,no cold agglutination phenomenon in 90% RH |
Wavelength Range | Wavelength Range is 410 - 650nm with optional operating |
Wavelengths | 410,500,540,590 and 650nm via built-in filters. |
Display | LCD Screen |
Resolution Ratio | 1% FS |
Wavelength Accuracy | +-1nm |
Result | Provides direct reading of test results in mg/l,Readout also available in Absorbance. |
Readout Mode | Data installation capacity of at least 99 groups; |
Immediate Result | less than 15 minutes. |
Guidelines:
The water monitor follows national standards which are established based on scientific guidelines such as Guidelines for drinking water quality promulgated by Ministry of Health in 2001,Guidelines for drinking water source (CJ3020-93), Guidelines for groundwater quality (GB/T14848-93), (Standards for water supplied by urban quality (CJ/T206-2005),Standards for surface environmental quality (GB3838-2002)and Standards for fisheries water quality(GB11607-89).
Features-Digital Ions Meters:
Test fast Immediate result
High automation,
Self-recording,
Self-reserving
Self-analyzing;
Print results via the built-in RS-232 connected with PC
Portable
Dustproof
Waterproof
Anti-chemical erosion.
Product Details:
Brand | Weiber |
Accuracy | +-0.5 % |
Measuring Range | 8 % ~ 27.5 % |
Weight | Approx. 800g |
Applications | Red Pepper |
Display | Digital L.C.D |
Temp Compensation | Automatic |
Power Source | Battery 1.5V X 4EA |
Dimensions | Body 155(L) X 65(W) X 25(H) mmSensor 170 mm |
WEIBER brings to you moisture meters for red pepper that are capable of giving accurate and repeatable results time after time. These meet the demands of true field work and help pepper producers and suppliers to determine the price of the red pepper by quality and quantity according to the moisture content in trade. Rugged construction and compact design offers worry free performance time after time. It features automatic temperature compensation, low battery indicator and use electrical resistance method to measure the moisture content. These meters are supplied with instruction manual helping users to operate the instrument in a simple way. A carrying case is provided for their safe storage and transportation.
Special Features:
Applications:
Product Details:
Brand | Weiber |
Accuracy | Moisture Content +-(0.5% n + 1) |
LCD Display | 4 digits, 10mm LCD |
Moisture Level Measuring Range | 0 - 50% |
Temperature Measuring Range | -10 to 65 deg C (or equivalent 14 to 122 deg F) |
Resolution | 0.1 |
Temperature | -0.8 deg C |
Operation Temperature | 0 deg C - 50 deg C or 32 deg F - 122 deg F |
Operation Humidity | Below 85%RH |
Power Supply | 4 x AA alkaline batteries (included) |
Item Dimension | 178 (L) x 68 (W) x 39 (D) mm |
Item Weight | 190g (batteries excluded) |
WEIBER tobacco moisture meter is Top Quality 2-in-1 Meter that detect moisture & temperature in tobacco leaves.The meter's probe can correctly measure humidity in Tobacco leaves even in the hard-to-reach areas to diagnose its moisture conditions as well taking the environment temperature. It has Microcomputer LSI circuit advanced microprocessor technology and crystal time base that guarantees measurements has highest level of accuracy with fast measuring & response time.
This meter has a high input resistance, self-calibration or self-test function, capable to store and cancel maximum value and hold function for easy readout of data. It has wide measuring range for both temperature (-10 to 65°C) and moisture level (0-50%). These instruments are portable and extremely accurate in measuring moisture content in lots of baled tobacco and are highly acclaimed from various industries includingtobacco industry, agricultural industries, food industries etc.
Special Features:
Applications:
Applicable to Tobacco, Automatic measurement of moisture and temperature for predicting drying times, ensuring construction best practices, and verifying damage.
Product Details:
Brand | Weiber |
Accuracy | +- 0.5 % |
Measuring Range | 8.5 % ~ 23.5 % |
Weight | Approx. 1Kg |
Applications | Flour products |
Display Digital | L.C.D |
Temp Compensation | Automatic |
Power Source | Battery 1.5V X 4EA |
Dimensions | 164(L) X 94(W) X 40(H) mm |
WEIBER flour moisture meter provides instant, nondestructive moisture content measurement in wheat flour and rice flour, whole wheat, milled and paddy rice and other powdered products.It features precise measurement and automatic temperature compensation and offers worry free performance time after time. The large LCD display enables users to read reading more clearly. The flour moisture meter employs electrical resistance method to measure moisture content.
Special Features:
Applications:
Product Details:
Brand | Weiber |
Display | Large Liquid Crystal Display (LCD) |
Measuring Range | 7% to 40% |
Weight | 2800gms |
Power | Normal 1.5 Volt Battery |
Usage | Soil / Clay |
Sensitivity | +-3% |
Sensor | 580mm |
Temperature Correction | Automatic |
Repeatability | +-0.2% |
Dimension | 155mm x 70mm x26mm (L X W X D) |
Soil moisture is commonly defined as the amount of water contained in a unit volume of soil. The retention of moisture, or water, in the soil and the attendant runoff from naturally occurring rainfall, snow melt, or irrigation are fundamental processes upon which all civilization depends for food production, potable water, and navigable streams and waterways.
Product Details:
Wavelength Range | 340 to 960 nm |
Mobility | Benchtop |
Spectral Bandwidth | 10 nm |
Display | Double 3 1/2 LED |
Model | ACM-33514-A / Acm-33514-B |
Detector | Silicon Photodiode |
Throughput For Tmas | Model No. |
Weight | 8.5 Kg (Approx) |
Brand | Weiber |
Repeatability | +/- 1 nm |
Dimensions | 490 x 300 x 165 mm |
Wavelength Resolution | 1 nm |
Light Source | 6V,1Amp,Tungsten Halogen lamp |
Resolution | 0.1%T,0.001 Abs |
Range | 340 to 960 nm |
Path Length | 10 mm / 10 mm & 50 mm |
Monochromater | 600 lines / mm grating |
Spectral Band Width | 10 nm |
Operating Temp Range | 5 to 45 deg C |
Power | 230V +/- 10% AC |
Accessories | Square Cuvettes 2 No. Dust Cover Operation Manual |
WEIBER spectrophotometer are used to measure how much a chemical substance absorbs light by measuring the intensity of light as a beam of light passes through sample solution.It is an economical, reliable, rugged and most accurate system for spectrophotometric analysis of any concentration. It operates at a wavelength range of 340 to 960 nm. Its outputs is available on 31/2 digital LED display in terms of optical density. Percentage transmission and concentration. Separate digital display is provided for wave length.
Highly advanced solid state I.C Technology has made its circuit very stable and accurate. Desired wavelength can be selected by adjusting the knob at the top panel.
Special Features:
Applications:
Product Details:
Brand | Weiber |
LCD Display | 4 digits, 10mm LCD |
Moisture Level Measuring Range | 0 - 50% |
Temperature Measuring Range | -10 to 65 deg C (or equivalent 14 to 122 deg F) |
Resolution | 0.1 |
Moisture Content | +-(0.5% n + 1) |
Temperature | +-0.8 deg C |
Operation Temperature | 0 deg C - 50 deg C or 32 deg F - 122 deg F |
Operation Humidity | Below 85%RH |
Power Supply | 4 x AA alkaline batteries (included) |
Item Dimension | 178 (L) x 68 (W) x 39 (D) mm |
Item Weight | 190g (batteries excluded) |
Most important factor influencing the quality of hay is the actual accurate moisture at the time of baling and then at storage time. WEIBER hay moisture meter allows the user to measure right moisture content in hay accurately and quickly. Properly preserved hay, cut at the correct time, dried in a windrow and moisture measured, and then baled at the correct moisture content and stored at the correct moisture will provide the maximum feed value to livestock. The Top Quality 2-in-1 Meter can detect moisture & temperature. The meter's probe can correctly measure humidity Grass /Hay's even in the hard-to-reach areas to diagnose its moisture conditions as well taking the environment temperature. It has Microcomputer LSI circuit advanced microprocessor technology and crystal time base that guarantees measurements and has highest level of accuracy with fast measuring & reaction time. This meter has a high input resistance, self-calibration or self-test function, capable to store and cancel maximum value and hold function for easy readout of data. It has wide measuring range for both temperature (-10-65°C) and moisture level (0-50%).
Special Features:
Uses Microcomputer LSI circuit and crystal time base that offers high accuracy measurement range & high resolution
HOLD function for easy read-out of data and viewing maximum value
Self-test function or self-calibration
Features extremely fast, accurate display
Compact, lightweight and easy operation
light weight ABS plastic housing assures maintenance free performance for many years. The housing has been carefully
shaped to fit comfortably in either hand
RS 232 C interface - optional if desired
Software for result analysis optional if desired
Applications:
Applicable to Grass /Hay. Automatic measurement of moisture and temperature for predicting drying times, ensuring construction best practices, and verifying damage.
Product Details:
Brand | Weiber |
Detector | Silicon Photo-diode |
Light Source | LED |
Wavelength Range | 400 to 700 nm |
Filter | Interchangeable glass filter 420 nm, 460 nm, 510 nm, 540 nm, 600 nm |
Display | 3 1/2 digits LCD |
Cuvette | Round 10 mm ID,12 mm OD 105mm L |
Photometric Range | 400 nm - 800 nm |
Transmittance | 0 ~ 100% T |
Absorbance | 0 ~ 1.999 Abs |
Concentration | 0 ~ 1999 Conc. |
Features of Colorimeter:
High photoelectric stability, LED Source, microprocessor controlled
Ideal for education or routine use
%T, Abs, Concentration
2 year warranty
Inexpensive ~ ideal for education and routine laboratory tasks
Small sample volume only 1.0 ml
Use square or round cuvettes with adapter
Product Details:
Brand | Weiber |
Principle | 90 deg Scattered Light |
Minimum Reading | 0.01 NTU |
Measuring Range | 0 - 50; 0 - 500 NTU |
Indicator Error | +-0.6% (+-2% F.S) |
Repeatability | 0.5% |
Zero Draft | +-0.5% F.S |
Power Supply | AC 220 V/ 110 V, 50 / 60 Hz |
Size | 39cm x 36cm x 18cm |
Weight | 6kg |
WeiberNephelometer/turbidity meteris used to measure the scattering degree of light generated by the insoluble particulate matter suspended in a transparent liquid or water, with capability to characterize the content of these suspended particulate matter.This is of particular use in water turbidity measurements as well as various medical, biological and agricultural assays.
Factors Affecting Turbidity
Special Features:
Applications:
Weiber’s Turbidity Meter is useful for liquid samples, such as listed below:
Product Details:
Brand | Weiber |
Operating Temperature | 0-40 Degree Celsius |
Test Object | Grains |
Test Range | 3~35% |
Repeat Error | Equal or Less than 0.2% |
Test Error | Equal or less than +-0.5% (mainly moisture range) |
Test Time | Equal or less than 10s |
Power Supply | four # 5 dry battery or 220V AC |
Automation Switch Off | The instrument will be switched off automatically if there is no operation within 3 minutes. |
Temperature Compensation | Automation |
Net Weight | 880gram |
WEIBER grain moisture meter is for testing the moisture content of grain at harvest time and while in storage.
Special Features:
Our grain moisture meter works on the principle of measuring the electrical conductivity of a given material, bearing a fixed relation with moisture content of the given material, which is measured using a superior solid state technology and displayed on the screen.
Applications:
4.6/5
Reviewed by 11 Users
Most Relevant Reviews