Industrial Ovens

Product Details:

Weiber top loading ovens are used for annealing, preheating, baking or any other heat processing where overhead handling equipment is used. The atop-loading ovens are specifically designed for burn-in, qualification testing and calibration of oil and gas downhole drilling instruments. The equipment features digital, microprocessor based, thermocouple actuated, and indicating temperature controller. Inner oven floor reinforced for loading and equipped with removable grating. Oven top surface constructed of steel plate and work space interior equipped with wear bars to prevent damage during loading.

Special Features:

• Temperature range up to 1050⁰F (565⁰C)
• Microprocessor based controls (HMI+PLC as an option)
• Simple calibration and auto-tuning function
• LCD/LED display (0.1??? resolution) and touch-sensitive keypad
• u Silicone door seals
• low noise circulation fans for better temperature uniformity
• Counter-weighted top doors make manual loading and unloading easy and fast
• High capacity compound horizontal airflow system
• Air intake and exhaust ports with manual dampers
• Differential air pressure switches
• Separated, insulated,corrosion resistant inner and outer surfaces
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)
• CE compliance.

Construction Details:

• WEIBER TOP LOADING OVENS are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature of Ambient + 5°C to 565⁰C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

Product Details:

WEIBER industrial Drying ovens are used across a range of industries and research laboratories for simple applications, such as drying and sterilizing glassware, to complex processes that require controlled heating and temperature uniformity such as bonding and curing. Temperature inside drying oven is controlled with a sensitivity of +1OC or better. Indirect heating from three sides is provided with the help of air heaters.
It is a technologically advanced and operator friendly solution which ensures uniform drying to consistently produce high quality product and also reduces product drying time compared to traditional drying methods.

 

Apart from that we are supplying our laboratory oven in India , catering to a variety of customers ranging from Defence Installations, Research Laboratories, Educational Institutes and various R& D laboratories of leading national and multinational companies.

 

Special Features:

• Temperature range up to 500° C
• Microprocessor based controller (HMI+PLC as an option)
• Doors with silicon gasket
• Doors equipped with lock and key arrangement
• Auto tuning and self-calibration function
• LCD display with temperature display resolution of 0.1°C
• Inbuilt digital timer(Optional)
• On-off heat switch
• Air circulation with internal plenums for uniform airflow within the oven.
• Robust, safe and reliable safe for drying.
• Corrosion-resistant interior and exterior.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)

 

Construction Details:

• WEIBER industrial drying ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 500°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

• Heating:

  Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A/Nichrome wires of suitable wattage.

 

 

Product Details:

WEIBER Composite Curing Ovens are used for curing a wide variety of composite material. They are commonly used in the aerospace and automotive industries.Airflow patterns maximize temperature uniformity throughout the oven and provide rapid ramp rates. Digital controls, and power switching components ensure accurate temperature control. Typical applications include curing filament-wound composites used in products such as light weight pressure vessels, and curing the composite components of wind turbine blades.

 

High pressure recirculation blower, along with fully enclosed & pressurized supply ducts, delivers heat with a combination airflow arrangement, and ensures the best heat distribution throughout the work chamber, even with varying loads. All units are fully factory tested, adjusted & certified.

 

Special Features:

• Maximum temperature range up to 500⁰F.(260⁰C)
• Microprocessor based controller (HMI+PLC as an option).
• Separate high limit instrument with manual reset provides over-temperature protection
• High pressure recirculation blower
• Fully enclosed & pressurized supply ducts
• Proper air circulation for uniform distribution of temperature throughout the oven.
• Internal Chamber made up of corrosion resistant Stainless Steel
• Simple calibration and auto-tuning function
• LCD/LED display with temperature uniformity of 0.1 deg C
• Internal temperature monitoring thermocouple jacks
• Timer(Optional)
• Touch-button controls allows quick and simple temperature setting.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)

 

Construction Details:

• WEIBER Composite Curing Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The Temperature of Ambient to 500°F is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

 

 

Product Details:

WEIBER walk-in/truck-in ovens are ideal for large batch processing that requires high temperatures. Common applications for these versatile furnaces including: aging, bonding, curing, drying, finish baking, heat treating and stress-relieving. These ovens are suitable for loading samples either manually or by fork truck. Weiber ensures industrial ruggedness, excellent process control, and dependable operation.

 

The walk-in oven are designed with insulated horizontal center panel to separate the oven interior into upper and lower chambers, each capable of different processing temperatures. It is provided with upper and lower racks with shelves for fast, efficient product loading and unloading. It is equipped with temperature controllers that offer the latest in heat-sensing technology and built-in floor level guide tracks that make truck loading easy.

 

Special Features:

• Maximum temperature range up to 1000⁰F (540⁰)
• Microprocessor based digital control system (HMI+PLC control system as an option).
• Hi Tech double walled Oven
• Digital temperature setting with an accuracy of one degree
• Elapsed time indicator(Optional)
• Simple calibration and auto-tuning function
• Horizontal, recirculating air flow creates precise, consistent temperature uniformity throughout the oven.
• Models are fully assembled and factory tested prior to shipment
• Stainless steel interior minimizes corrosion problems and provides long life
• turdy, welded, double-wall construction
• Audio visual alarm for malfunctioning, over temperature, power failure etc.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)

 

Construction Details:

• WEIBER Walk In Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The Temperature of Ambient to 1000°F is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

 

 

 

Product Details:

Weiber Shelf Oven provides large work space at low cost. The equipment is ideal for shelf processing applications such as baking, drying, curing and preheating at temperatures up to 550O F. it feature full horizontal airflow. It offers re-circulating blower air flow safety switch for the uniform distribution of air inside the chamber.

Special Features:

• Microprocessor based temperature controller (HMI+PLC as an option)
• Simple calibration and auto-tuning function
• 1 set of roll out shelf
• Extra roll out shelf (optional)
• LCD/LED display (0.1℃ resolution) and touch-sensitive keypad
• Motor control push buttons and on-off heat switch
• Separate heating element control contactors
• Recirculating blower air flow safety switch
• Audio-visual alarms for malfunctioning, over temperature, power failure.
• Side to side horizontal air flow
• Adjustable fresh air intake and exhaust dampers
• Interior construction of stainless steel
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Built-in timer(Optional)
• Touch-button controls allows quick and simple temperature setting.
• Temperature chart recorder/printer for printing graphs(optional)

Construction Details:

• WEIBER Shelf Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The Temperature of Ambient to 550°F is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

Product Details:

Rotating rack oven is specially designed for the accelerated heat deterioration of rubbers and plastics that includes polyesters and vinyl. These are considered as the perfect merchandising oven for both industrial and household purposes.
 
Rotating rack ovens are incorporated with the most developed and advanced technology, as they are equipped with a timer that automatically lifts and rotate heavy duty rack to ensure distribution of heat across every product. They are used in variety of industries such as pharmaceutical industries, food processing industries for cooking purposes and many more. These are economically designed and make sure that the balance of the environment is not disturbed.
 
Features:

Stainless steel exterior/interior

Compact design

Energy efficient

Digital programmable controls

Reliable

Long lasting

Self-contained steam system

 
Applications:

Glassware design

Batch testing

Preheating process

Conditioning

 

Product Details:

Convection batch ovens are designed to produce equilibrium temperature in the convection zone not far above the parts target temperature. These are extensively used in variety of applications such as baking, curing, drying, finishing, melting, pre heating and many more.

 

Convection heat occurs when air passes over an object and this kind of heating requires contact of the airflow with the solid parts. These are frequently referred as forced air batch ovens where the primary effectiveness of heat transfer is derived from the air volume being circulated within the batch oven.

Product Details:

These are vertical air flow, forced convection industrial heat treating ovens. Floor level cabinet ovens are heavy in weight and are considered as an excellent low cost solution for various applications. These are used in conjunction with a custom and offer uniform internal temperatures and accurate ramp and soak time and temperature controls.

 

They are incorporated with the most advanced and developed technology. Floor level cabinets are manufactured keeping in mind that any hazardous substance does not harm the user, so they are provided with accurate safety measures.

 

Features:

• Adjustable
• High limit temperature control
• Welded construction
• Vertical forced airflow
• Ergonomically designed
• Long lasting
• Reliable
• Easy to operate

Applications:

• Quenching
• Tempering
• Preheating process
• Stability testing
• Glassware drying
• Aging testing
• Sterilizing

 

Product Details:

The class 100 bench ovens are specifically designed to meet class 100 requirements without the use of filters, thereby simplifying oven maintenance and cleaning. These ovens are provided with fan forced air circulation that offers work space temperature for testing applications. These are economically designed equipment’s that are used in variety of applications.

 

These equipment’s provide excellent uniformity and temperature control, rapid rise and recovery times and are completely surrounded by insulation to eliminate heat transfer from metal and hot air leakage at panel seems.

 

Features:

• Compact design
• Large capacity
• Energy efficient
• Chamber made of stainless steel

Applications:

• Conditioning
• Pre heating
• Electronic burn in
• Sterilizing
• Annealing
• Glass ware drying

 

Product Details:

Mini rotating ovens provides an even bake without manual pan rotation. These ovens take less space and less time but also offer lowest power consumption. These are provided with unique air flow system, removable rack, microprocessor based PID controller, along with full glass and double pane door that gives a full view of product to the customers.
 
Mini rotating ovens provides an even bake without manual pan rotation. These ovens take less space and less time but also offer lowest power consumption. These are provided with unique air flow system, removable rack, microprocessor based PID controller, along with full glass and double pane door that gives a full view of product to the customers.
 
Features:

Compact design

Stainless steel exterior

Energy efficient

Digital programmable controller

Self-contained steam system

Removable rack

 
Applications:

Batch testing

Annealing

Conditioning

Glass ware drying

Tempering

 
 

Product Details:

Large capacity bench ovens are provided with a fan forced circulation that offers work space temperature for testing applications. These are extremely economical and can be easily moved to various locations. These are designed to handle various applications that require maximum temperature of 4000F and with +0.5 % control accuracy and +80 F uniformity for efficient drying of large samples.

 

These types of ovens are long lasting and can be available in both standard and customized designs. They are incorporated with international safety features that indeed protect the user from any hazardous substances and are definitely large in size that can accommodate number of products.

 

Features:

• Low cost
• Ergonomically designed
• Large capacity
• Long lasting
• Microprocessor based PID controller
• Chamber made of stainless steel

Applications:

• Batch testing
• Annealing
• Conditioning
• Glass ware drying
• Tempering

 

Product Details:

WEIBER Hot Air Oven uses dry heat to sterilize articles. Hot Air Oven uses a microprocessor to control the temperature. The double walled insulation keeps the heat in and conserves energy. These do not require water and there is not much pressure build up within the oven, unlike an autoclave, making them safer to work with. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various individual and specialized research applications.

Salient Features:

Separated, insulated inner and outer surfaces

Easily accessible interior for maintenance and cleaning

noiselessfan which ensures proper circulation and strong dispersion of air.

Full opening door hinged on right side (left side optional)

Microprocessor based temperature controller.

Temperature chart recorder/printer for printing graphs(optional)

An automatic over temperature alarm ensures your samples are always protected.

RS 232/485 interface.(optional)

Universal Digital Data Recorder system (optional)

HMI+ PLC for temperature control, data recording (optional

 

Construction Details:

WEIBER hot air ovens are double walled convection heated and cooled units. Outer body of lab ovens are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is made of heavy gauge stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

Temperature Control:

The temperature inside our hot air ovens is controlled through microprocessor based controller (HMI & PLC controller).

Temperature Range: Temperature range of our standard oven is 5°C above ambient to 250°C /300o C.

Insulation: The gap of 75 mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses.

Air circulation: Triple walled back of unit is fitted with air circulation fans for maintaining temperature uniformly throughout the oven.

Features of Coaxial Circulation Fan:

Vacuum impregnated stator winding with dr. back varnish under red baktol

Non-hygroscopic.

Best IR value

Bright bar (EN - 8 class) shaft.

Bush bearing of branded companies.

Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.

Pressure die-casted-rotor manufactured with zero error.

Boats of high accuracy

Applications:

Annealing

Die-bond Ccuring

Drying

Polyimide Baking

Sterilizing

Product Details:

WEIBER Gravity Convection Ovens are ideal for applications in which temperature uniformity is not essential, and where samples may otherwise be disturbed by a fan-generated airflow like powders and foils.

 

These ovens are constructed to remove the moisture as quickly as possible. They are extensively used in various pharmaceutical industries, food processing industries, laboratories and schools. They are incorporated with most developed and latest technology, provided with international safety standards.

 

Compatible Standards:

• ASTM E145-94(2011)
• WK 45844
• IEC 62133

Special Features:

• Temperature range up to 250oC.
• Separated, insulated inner and outer surfaces
• Easily accessible interior for maintenance and cleaning
• Full opening door hinged on right side (left side optional)
• Microprocessor based temperature controller.
• Temperature chart recorder/printer for printing graphs(optional)
• An automatic over temperature alarm ensures your samples are always protected.
• RS 232/485 interface.(optional)
• Universal Digital Data Recorder system(optional)
• HMI+ PLC for temperature control, data recording (optional)
• USB ports for PC connectivity(optional)

Construction Details:

• WEIBER laboratory ovens (gravity convection) are double walled convection heated and cooled units. Outer body of ovens are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is made of heavy gauge stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage.

• Temperature control:

The temperature inside our laboratory ovens (gravity convection) is controlled through Nano technology based ergonomic controller (HMI+PLC optional).

• Temperature Range: Temperature range of our laboratory ovens (gravity convection) is250o C.
• Temperature chart recorder/printer for printing graphs

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery,starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

 

Product Details:

WEIBER offers a selection of benchtop, cabinet, walk-in and curing ovens that are ideal for curing applications.Curing Ovens are typically used for the thermal cross-linking of coatings, adhesives, rubber and thermoset plastics. The electronics and semiconductor industries use these ovens for epoxy curing and polyimide curing. These offer fast ramping and cool down rates for maximum productivity, short cycle times and consistent, reproducible curing processes for all product loads.

 

Curing ovens utilize uniform airflow which delivers heated air from both sides of the chamber for uniform operating temperatures, vacuum ports, lift doors, and tight temperature uniformities.

 

Special Features:

• Temperature range up to 350⁰C
• Recirculation fans with high efficiency motors to reduce energy consumption.
• Microprocessor based controller (HMI+PLC as an option)
• Simple calibration and auto-tuning function
• LCD/LED display (0.1℃ resolution) and touch-sensitive keypad
• designed to provide tight temperature tolerance and precise control for repeatable results
• Ovens are exhausted to effectively remove the VOCs given off during curing, ensuring a safe environment.
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Robust structural oven frames and component supports
• Corrosion-resistant interior and exterior.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)

 

Construction Details:

• WEIBER Batch Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 350°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery,starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kantha/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

 

Product Details:

Weiber manufactures vacuum tray driers for drying of thermal sensitive materials which get easily resolved, polymerized or deteriorated under higher temperature. Heat sensitive materials can be driedat low temperatures under vacuum, since the environmental pressure is reduced below the vapour-pressure of the contained water or solvents. Oxidation or Contamination by Air is eliminated. HollowFibers, Medical Devices, Chemical Salts, Fine Chemicals, Dyes, Glandular Products, Pharmaceuticals andFood Extracts (Gluten, Glues, Pepsin), Rubber Explosive, etc. are ideally suited for drying in this manner.

 

Drying under vacuum is also environmentally friendly because the Evaporated Solvents can easilybe re-condensed. These solvents can then either be recycled or disposed of without any problem.

 

Special Features:

• Temperature range upto 350⁰C
• Microprocessor based controller (HMI+PLC as an option)
• Dial type pressure gauge (digital pressure gauge as an option)
• Pressure release valve in Steam line.
• Doors hinged with silicon gaskets
• Equipped with vacuum break valve and drain valve
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Temperature chart recorder/printer for printing graphs(optional)

 

Working Principle:

The oven is connected to a vacuum pump to create vacuum environment. At an pressure of ab out 0.03 to 0.06 bar vacuum tray dryer is operated (different pressure levels are adjusted for different applications.). the water boils at low temperature due to formation of vacuum, so evaporation of water takes place fast and the materials kept are dried.

 

Construction Details:

• WEIBER Vacuum Tray Dryers are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperatureof Ambient + 5°C to 350°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

• Heating:

  Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage.

 

Applications:

• Preheating Process
• Drugs, chemical, powder drying
• Sterilizing
• Glassware Drying

 

 

Product Details:

Weiber manufactures tray driers for drying of thermal sensitive materials which get easily resolved, polymerized or deteriorated under higher temperature. It offers no contamination due to closed arrangement inside drier. It is well accepted for economical drying of granules, powder, food material & chemicals.

 

A highly effective recirculating air system is provided in the Tray Dryers. The heated air, is recirculated with fresh air in selected proportions for optimum drying. The system is designed so that the materials at the top & the bottom dry simultaneously. Uniform air circulation, controlled temperature, sturdy construction and large working space are the valuables of the oven which is suitably designed to cover wide temperature range.

 

Special Features:

• Microprocessor based ergonomic controller for temperature setting and other parameters.(HMI+PLC based controller as an option).
• Dryer Chamber with Vapor Extraction system & Heating Arrangement
• Simple calibration and auto-tuning function
• LCD/LED display (0.1??? resolution) and touch-sensitive keypad
• Corrosion-resistant interior and exterior.
• Audio visual alarm for malfunctioning, over temperature, power failure etc
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Temperature chart recorder/printer for printing graphs(optional)

 

Working Principle:

The material to be dried is kept on the tray. The hot air is continuously circulated and forced convection heating takes place to remove the moisture from the material. And simultaneously the warm air is ducted off.

 

Construction Details:

• WEIBER Tray Dryers are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 200°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, pen, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

 

 

Product Details:

The vacuum ovens from Weiber are heating equipments that are designed to operate across a wide temperature range under normal atmospheric pressure or vacuum conditions up to 30” Hg, for day to day heating and vacuum drying applications. Designed for high-precision temperature control and equipped with a flexible vacuum system, they provide fast and gentle drying solutions for heat-sensitive and air-sensitive materials such as cosmetics, books, food items, clocks, PCBs and other electronic components. These vacuum heating and drying ovens are designed for excellent temperature and Vacuum performance, facilitating their use for drying and desiccation of samples, powder drying, vacuum embedding and electronic component processing. These economical and highly efficient vacuum ovens are employed for a wide range of scientific and research applications and find widespread usage in research laboratories, defence installations, educational institutes and industrial units.

 

The vacuum ovens from Weiber are available in various sizes and configurations and are completely customizable as per the specific requirements. They are designed in accordance with ASTM standards and bear CE certification for safety and reliability. The Vacuum ovens are essentially double walled equipments that feature high quality, heavy gauge SS 304 stainless steel internal surfaces and external surfaces made up of powder coated galvanized sheets with paint finish. The equipment features highly resistant and non-corrosive external and internal surfaces and the internal surfaces are argon welded for seamless welds and strong bracing. The gap between the outer and inner wall is filled with high-grade mineral glass wool for maximum thermal efficiency. The double plenum design of these vacuum ovens ensures a cooler outer surface for easy handling of the equipment. The equipment is also provided with a toughened glass door for increased visibility.

 

Features:

The equipment uses an indirect heating system comprising of air heaters for three-side heating of the chamber. They are also provided with efficient fans and motor that help in maintaining a continuous air circulation for uniform distribution of heat. The Weiber vacuum ovens use PID microprocessor based controllers cum indicators for highly efficient temperature control and display of the working temperatures. They are also provided with an easy to use control panel that comprises of ON/OFF switches, indicator lamps, temperature controllers and thermostat. These equipments are connected with data logger units for storage of the recorded data and are provided with an RS 232 interface for PC connectivity.

 

Key Features:

• Economical and versatile usage
• Energy Efficient units
• Long life
• Low Maintenance
• Scientifically designed for excellent vacuum and temperature control
• Smooth, highly resistant and non-corrosive external and internal surfaces
• Argon welded internal surfaces for seamless welds
• Highly reliable and safe operation
• Toughened glass door for increased visibility
• Double plenum design for safe handling
• Precise Vacuum Control: 28” (70.2 cm) Hg displayed on analog gauge
• Calibration And Protocol Documentation
• Designed in accordance with ASTM standards
• Bear CE certification

 

 

Product Details:

Lab Vacuum Ovens can be used for process drying under vacuum or standard atmospheric conditions. In this kind of ovens, the thermal process occur in an air tight chamber where a desired level of vacuum has been applied using an external vacuum pump. Vacuum ovens can also help in prevention of surface reactions such as oxidation, decontaminating samples.

 

These are incorporated with the latest and the most developed technology, provided with international safety standards. Vacuum ovens are equipped with silicone gaskets and these gaskets resist a wide variety of temperatures and pressures break down in the presence of solvents and acids.

 

A vacuum (low-pressure) environment has a lower boiling point, allowing drying treatments at a lower Temperature. The vacuum oven enables drying treatment at a lower temperature for specimens that cannot be treated by conventional high-temperature drying.

 

Compatible Standards:

• BS EN ISO 1741:1995
• IEC 60204
• EN 61000-6-2
• EN 55011

Special Features:

• Temperature range up to 200oC.
• Separated, insulated inner and outer surfaces
• Coordinated, modular system with vacuum pump and vacuum module
• 2 aluminum expansion racks
• Easily accessible interior for maintenance and cleaning
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Microprocessor based temperature controller.
• Temperature chart recorder/printer for printing graphs(optional)
• An automatic over temperature alarm ensures your samples are always protected.
• RS 232/485 interface.(optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• HMI+ PLC for temperature control, data recording (optional)

 

Construction Details:

• WEIBER vacuum ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 200°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, pen, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

• Heating:

  Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage.

Applications:

• Pre heating process
• Conditioning
• Electronic turn
• Stability testing
• Moisture determination
• Plating
• Drying of rubber, paper, and textiles
• Aging tests

 

 

Product Details:

WEIBER round vacuum ovens are widely used for day to day heating and drying applications performed in various laboratories, which require heating as well as vacuum applications.

 

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications.

 

A vacuum (low-pressure) environment has a lower boiling point, allowing drying treatments at a lower Temperature. The vacuum oven enables drying treatment at a lower temperature for specimens that cannot be treated by conventional high-temperature drying.

 

Compatible Standards:

• BS EN ISO 1741:1995
• IEC 60204
• EN 61000-6-2
• EN 55011

 

Special Features:

• Temperature range up to 200oC.
• Separated, insulated inner and outer surfaces
• Coordinated, modular system with vacuum pump and vacuum module
• Precise Vacuum Control: 28” (70.2 cm) Hg displayed on analog gauge
• 2 aluminum expansion racks
• Easily accessible interior for maintenance and cleaning
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Microprocessor based temperature controller.
• Temperature chart recorder/printer for printing graphs(optional)
• An automatic over temperature alarm ensures your samples are always protected.
• RS 232/485 interface.(optional)
• Universal Digital Data Recorder system (optional)
• HMI+ PLC for temperature control, data recording (optional)
• USB ports (optional)

 

Constructions Details:

• WEIBER vacuum ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 200°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, pen, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

• Heating:

  Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage.

 

Applications:

• Pre heating process
• Conditioning
• Electronic turn
• Stability testing
• Moisture determination
• Plating
• Drying of rubber, paper, and textiles
• Aging tests

 

 

 

Product Details:

WEIBER batch ovens are used for a wide variety of heat processes including drying, curing, aging, annealing, stress relieving, bonding, tempering, preheating, and forming. Batch ovens are essentially heated boxes with insulated doors that process products one at a time or in groups. These are for applications where load size or production volumes vary substantially. Batch oven have been designed to accommodate a variety of load sizes and production volumes. It accommodates horizontal air flow virtually from Front-to-back without restricting air passage to provide rapid heating with high thermal transfer to the chamber contents and high uniformity within the chamber. It also helps to eliminate water or moisture accumulated during the pre-treatment washing process.

Special Features:

• Temperature range upto 850⁰F(455⁰c)
• Microprocessor based temperature control.(HMI+PLC as an option)
• Uses horizontal recirculating airflow to ensure uniform temperatures throughout the oven.
• Cleaning is easy due to the scratch-resistant, baked enamel exterior, stainless steel interior, and smooth door surface.
• Features a sturdy, welded, double-wall construction
• High limit over-temperature protection
• Corrosion-resistant
• Simple calibration and auto-tuning function
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)

 

Construction Details:

• WEIBER Batch Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperature up to 850°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, pen, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

 

Product Details:

WEIBER burn-in ovens are engineered for applications such as high dissipation forward bias, high-temperature reverse bias, dynamic and static burn-in of IC, RAM, ROM, microprocessors and other semiconductor devices.

 

Integrated Circuits (IC’s) and other electronic devices are burned in at elevated temperatures to stress and exercise the devices under test. The high temperatures force early failure, known as “infant mortality”, at this point rather than later when they are in use in a finished product. This dramatically improves the reliability of the product. During burn-in the temperature rises as the air travels across the chamber due to the heat dissipated by the devices. High volume recirculation fans maintain consistent, uniform temperatures.

 

Standard Compiled:

• BS EN 60191-6-16:2007
• BS EN 1539:2009
• MIL STD 833D

 

Special Features:

• Temperature range up to 300OC.
• Microprocessor based controls (HMI+PLC as an option)
• Simple calibration and auto-tuning function
• High volume recirculating fans maintain consistent, uniform temperatures
• Horizontal airflow provides uniform atmosphere flow across horizontally positioned loads.
• Over-temperature protection control
• Built-in timer and touch-button controls allows quick and simple temperature setting.
• Corrosion-resistant interior and exterior.
• RS 232/485 interface. (optional)
• Universal Digital Data Recorder system(optional)
• USB ports for PC connectivity (optional)
• Temperature chart recorder/printer for printing graphs(optional)
• Castors for ease of mobility (optional)

 

Construction Details:

• WEIBER BURN IN OVENS are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
• Temperature control:

The temperatureof Ambient to 300°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

• Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  • Vacuum impregnated stator winding with dr. back varnish under red baktol
  • Non-hygroscopic.
  • Best IR value
  • Bright bar (EN - 8 class) shaft.
  • Bush bearing of branded companies.
  • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
  • Pressure die-casted-rotor manufactured with zero error.
  • Boats of high accuracy

Features of Coaxial Circulation Fan:

• Temperature chart recorder/printer for printing graphs(optional)

  These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

 

 

Product Details:

WEIBER clean room ovens are special ovens to work in clean room environments. Clean ovens are used specifically for heat treatment and applications for air requirements of class 5, class 100, class 1000 etc.

 

Variety of high performance models to choose from which ensures automated operations and dedicated cleanliness even throughout temperature heating up and cooling operations. These ovens feature an exclusive air flow pattern that assures unsurpassed temperature control and uniformity and quick recovery times. A stainless steel blower, driven by constant speed induction motor, circulates air throughout the oven.

 

Standard Compiled:

• FED-STD-209D,CLASS 100
• FED-STD-209E
• ISO 14644-1
• JIS 89920:2002

 

Special Features:

• Temperature range up to 250oC.
• Separated, insulated inner and outer surfaces
• 2 aluminum expansion racks (can be increased according to the model size)
• Easily accessible interior for maintenance and cleaning.
• Equipped with safety devices and high temperature protection.
• Lockable doors with mobile updates.
• Mobile updates.(optional)
• Fixed or castor mounted(optional)
• Class 5/10/100/1000 etc cleanliness levels: high levels of cleanliness areachieved by employing HEPA filters and a back to front horizontal laminar circulation system which produces uniform high temperature airflow.
• Airtight structure ensures zero contamination.
• Automated operation throughout heat treatment process: an automatic damper is provided for automation in all processes from temperature heat up to heat treatment and temperature pull-down.
• Microprocessor based temperature controller.
• Temperature chart recorder/printer for printing graphs(optional)
• An automatic over temperature alarm ensures your samples are always protected.
• RS 232/485 interface.(optional)
• Universal Digital Data Recorder system (optional)
• HMI+ PLC for temperature control, data recording (optional):

 

 

 

Product Details:

This equipment’s are incorporated with the most advanced and latest technology. High bench temperature ovens offer an extremely suitable recirculating blower system to basically improve the temperature uniformity and reduce the heat up time of oven and parts.
 
These kinds of ovens also offer applications for testing and can be placed on the bench. They are designed to fill the need for economically priced ovens for medium and high temperature process such as tempering and stress relief.
 
Features:

Stainless steel interior

Sturdy welded steel construction

On off heat switch

Brushed stainless steel exterior

Reliable

Eco friendly

Compact design

Long lasting

Applications:

Stress relieving

Preheating proce

Stability testing

Conditioning

Electronic burn in

Sterilizing

 

Product Details:

Industrial bench ovens are typically used for thermal processing and they process materials at low temperature and are without refractory insulation. There are different heat sources for industrial ovens like natural gas, steam, propane, oil and other fuels.

 

They are available in standard and customized sizes and are even incorporated with the most developed and advanced technology. Industrial bench ovens can be placed on the bench and are used in various fields such as rubber industries, hydrogen, bulk drugs and many more. Features such as on-off switch, panel board, thermostat, heat switch are provided in these equipment’s

 

Features:

• Recirculating blower air flow safety switch
• Microprocessor based PID controller
• Energy efficient
• Corrosion resistant
• Reliable
• Cost effective
• Easy to operate
• LED display and touch sensitive key pad

 

Applications:

• Electronic burn in
• Conditioning
• Preheating process
• Sterilizing
• Components processing
• Stability testing

 

 

 

 

Product Details:

The universal oven are used to perform material tests, run complex experiments with highly sensitive loads, drying or tempering electronic components, and many more. These are incorporated with the most developed and latest technology. This equipment’s can be loaded at any place as they are portable to be carried.
 
They are made of stainless steel and the best part about this is that it can be easily cleaned and leaves no germs or contamination behind. Over temperature protection and control of technology are precisely provided in these units.
 
Features:

Microprocessor based

Temperature indicator controller

Adjustable

Reliable

Ergonomically designed

Recirculating blower air switcher

Separate heating element control contractor

Applications:

Drying

Annealing

Conditioning

Stability testing

Components processing

 

Product Details:

Weiber Hybridization Oven is especially designed to create ideal environment for nucleic acid hybridization including northern, southern and western blot applicationwhere sterile conditions are required and where the integrity of the sample must be preserved while heating it to the exact temperature for the right period of time. It also works as an incubator shaker.

 

Our hybridization ovens offer better agitation, higher through put, and requires less volume per membrane area. It incorporates a microprocessor temperature controller that together with a large, noiseless and quiet circulating fan, assure uniform and precise temperature control. These have the capacity to conduct up to 20 independent probe hybridizations, each with up to seven separate membranes.

 

Special Features:

• Hybridization Oven’s unique fan assisted airflow system circulates air evenly and continuously, delivering excellent temperature uniformity throughout the oven.
• Microprocessor temperature controller (HMI+PLC as an option).
• The 5-20 RPM rotation speed range permits hybridization and washing at different speeds at the touch of a dial.
• Audible and visual alarms:
  • when preset temperature limit is reached.
  • when each step of any programmed mode is terminated.
  • When low humidity level is detected by the sensor.(optional with humidity control)
  • When the door is open.
• Protection of the main body and the circuit board against overheating.
• Corrosion resistant interior and exterior.
• Capacity to hold up to 20 bottles
• Self-calibration ad auto tuning function.
• LED/LCD display (0.1??? resolution) and touch-sensitive keypad.
• Heated glass door for observation provides a clear view of samples during operation.
• RS 232/485 connectivity.(optional)
• Open and close update on mobile.(optional)
• Data logging system.(optional)
• USB ports for pc connectivity.(optional)
• Temperature chart recorder/printer for printing graphs.(optional)

Product Details:

WEIBER Forced Convection Ovens use a motor driven circulating fan that is placed between the unit’s inner and outer housings. A timer is placed inside them that control the fan and the heating element. This kind of ovens work faster than conventional ovens because it uses the fan that keeps on circulating to ensure that even distribution of heat and faster cooking takes place.

 

Forced convection ovens are basically designed to save time of heating. The temperature that is inside these units are moderated through hydraulic type thermostat or with a digital controller microprocessor based temperature controller cum indicator to achieve maximum accuracy.

 

These are also known as heat advection. There are many types of mixing that can also utilize forced convection to basically distribute one substance to another. Forced convection can even happen by natural means such as when the heat of a fire causes expansion of air and bulk air flow. In this type of process the fan rapidly circulates hot air forces heat faster than would naturally happen due to simple heating even without a fan.

 

Compatible Standards:

• ASTM D5423-14
• ASTM D5423-13
• ASTM E145-94
• CUSTOMER DEFINED

 

Special Features:

• Temperature range up to 250^oC.
• Separated, insulated inner and outer surfaces
• Easily accessible interior for maintenance and cleaning
• Forced-air convection, noiseless fan which ensures proper circulation and strong dispersion of air.
• Full opening door hinged on right side (left side optional)
• Microprocessor based temperature controller.
• Temperature chart recorder/printer for printing graphs(optional)
• An automatic over temperature alarm ensures your samples are always protected.
• RS 232/485 interface.(optional)
• Universal Digital Data Recorder system (optional)
• HMI+ PLC for temperature control, data recording (optional)