Industrial Incubators

Product Details:

Unlike air jacket CO2 incubator where temperature is maintained by air circulation, the water jacket incubators chamber is surrounded by hot walls, filled with hot water. Water-jacked incubators are the more popular choice. A water jacket will hold the temperature longer than an air-jacket when power is lost. This is helpful in many situations; the incubator will be able to “recover” more quickly after a power outage and also get back to temperature more quickly after the door has been opened.

 

It combines precise CO2 control with IR sensors. it feature precise unsurpassed temperature stability, and superior parameter recovery characteristics, with innovative continuous contamination control technology. Carbon Dioxide Incubators are intended for tissue and cell culture applications. The incubator control three essential variables; stable CO2 level, temperature, and relative humidity and creates an ambient environment for cells to thrive.

 

Special Features:

• Clear LCD Display
• Dual Infra-Red Sensor
• Safety thermostats and over temperature protection
• Easy to use
• Round-Corner Chamber Design
• Low noise level
• Unique HEPA filtration system removes 99.97% of all airborne microbes and isolated particulates 0.3 microns or larger.
• Gas seal screen
• ISO certified
• Two point CO2 calibration
• Quick clean shelf system with allows users to disassemble shelves without tools
• CFC free refrigerator system
• RS 232 interface
• CFC free refrigeration unit

 

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• Power failure alarm: Automatic Power detection and Audio Visual Alarm. Adjustable or fixed 15 min delay before alarm. Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• PT-100 sensor With Ambient Sensing by Semi-conductor Temperature Sensor.
• Dry contacts (Remote Control) for central alarming.
• R.F based Remote Alarm System
• Built-in chart recorder.

 

 

Product Details:

Weiber Air Jacket tri Gas Incubator is specially designed for cell culture application requiring below ambient in vitro oxygen atmospheres. It offers both CO2 and O2 control using nitrogen gas to displace ambient air. An infrared sensor selectively measures CO2 concentration in real-time and a microprocessor controls temperature and CO2 concentration.

 

The large size TFT LCD display shows parameters such as temperature, CO2, O2 and N2 concentration and RH. Air jacketed incubators circulate air throughout the interior of the incubator to maintain constant temperature. It also offers an option for O2 control, which allows tri-gas control for sustaining hypoxic conditions.

 

It offers wide range of application in cell biology, microbiology, biological-tissue engineering, pharmaceutical research, IVF, human and veterinary medicine, and dental technology -- applications that demand long-term stability, reliability, homogeneity and reproducibility of results.

 

Special Features:

• Clear LCD Display
• Dual Infra-Red Sensor
• Safety thermostat and over temperature protection
• Easy to use
• Round-Corner Chamber Design
• Low noise level
• HEPA filter
• Gas seal screen
• ISO certified
• built-in air pump
• RS 232 interface

 

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• Power failure alarm: Automatic Power detection and Audio Visual Alarm. Adjustable or fixed 15 min delay before alarm. Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• PT-100 sensor With Ambient Sensing by Semi-conductor Temperature Sensor.
• Dry contacts (Remote Control) for central alarming.
• R.F based Remote Alarm System
• Built-in chart recorder.

 

Applications:

• cell biology
• microbiology
• biological-tissue engineering
• pharmaceutical research
• IVF
• human and veterinary medicine
• dental technology

 

 

 

Product Details:

The air jacket tri gas incubators from Weiber are designed to provide precise control of O2 and CO2 levels, working temperatures and high humidity conditions within the incubator for a wide variety of hypoxic and hyperoxic applications. These incubators are most commonly employed for growing and maintaining cell cultures and find widespread usage in microbiological studies, cancer research, tissue engineering, neurosciences, in-vitro fertilization and study of drug interaction, toxicity and resistance profiles in various cell lines for drug development and trials. These equipments offer an option of O2 control and CO2 control by using nitrogen gas to displace the ambient air, therefore providing a physiologically similar in-vivo environment and high precision flexible control for robust applications as well as more sophisticated applications with stringent requirements.

These air jacket tri gas incubators feature a stainless steel chamber with easy to clean, round corner chamber design and non-corrosive interiors with an antimicrobial coating that offers natural antimicrobial protection upon contact. The equipment adopts a direct heat air jacket heating system for faster heating and rapid temperature recovery. The air jacket also provides insulation from external temperature fluctuations, ensuring greater temperature stability and uniformity. The units are also provided with easy-to-remove, replaceable shelves for segregation of different samples.

The tri gas incubators from Weiber come equipped with a well-designed O2/N2 inlet module with dual gas nozzles. They use a multiplex gas system for mixing of multiple gases and maintaining their precise concentration up to an accuracy of +/- 0.1%. These multiple gas control systems use microprocessor based controllers for accurate estimation of O2 levels within the incubator, initiating addition of O2 or N2 as per the requirement. The equipment uses high quality IR CO2 sensors that respond extremely fast to any changes in the gas concentration, thereby ensuring long-term stability of CO2 concentrations. The maintenance free Zirconium oxide sensors provide precise control of O2 concentrations. The built-in air pump allows O2 set-point regulation up to a maximum of 40%. The equipment also comes equipped with an active humidification system for maintaining the adequate humidity levels, therefore providing optimal growth conditions and preventing the cultures from drying out.

 

Features:

Weiber tri gas incubators feature an easy to use, soft touch control panel for optimum operation. They are designed to provide highly precise incubation conditions, ensuring homogeneity, reliability and long-term stability of test conditions for reproducibility of results. They use highly efficient HEPA filters for maintaining a sterile, contamination free environment for various cell culture applications. The equipment is provided with a clear LCD display for displaying the CO2 concentration, temperature and other incubator parameters, providing instant status for continuous monitoring. It comes equipped with an array of safety features including comprehensive audio and visual alarms for all operating parameters, ensuring safe and reliable operation of the equipment.

Product Details:

Weiber Air Jacket CO2 Incubator provides excellent protection from contamination by dry-heat sterilization. It offers precise control of temperature and CO2 and creates an exceptionally stable environment. It offers automatic two point CO2 calibration. Stability of the sensor brings temperature and humidity to equilibrium, especially following the opening of the door.

 

It provides environment for optimum tissue cell culture growth. The chamber also provides an environment for the storage and preservation of gametes and animal tissue cell cultures at near body temperature

To ensure optimal conditions, the incubator is constructed of stainless steel chambers and shelves, removable door gaskets with guards to prevent damage when inserting shelves.

 

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications.

 

Special Features:

• Clear LCD Display
• CO2 sensor: IR
• Safety thermostats and over temperature protection
• Easy to use
• Less Noise
• Unique HEPA filtration system removes 99.97% of all airborne microbes and isolated particulates 0.3 microns or larger.
• Inside Glass Window
• Less maintenance
• Audio and visual alarm on malfunction
• Two point CO2 calibration
• Quick clean shelf system with allows users to disassemble shelves without tools
• RS 232 interface
• CFC free refrigeration unit

 

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• Power failure alarm: Automatic Power detection and Audio Visual Alarm. Adjustable or fixed 15 min delay before alarm. Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• PT-100 sensor With Ambient Sensing by Semi-conductor Temperature Sensor.
• Dry contacts (Remote Control) for central alarming.
• R.F based Remote Alarm System
• Built-in chart recorder.
• Serial Thermal Printing facility.

 

 

Product Details:

The WEIBER Microplate Incubator Shaker is designed for a wide variety of mixing applications for accurate incubation of reactions and denaturation of nucleic acids and proteins. It combines an advanced microprocessor-based controller with heating and cooling to deliver outstanding reliability, safety and overall performance.

 

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various specialized research applications.

 

Special Features:

• Unit occupies a small bench space, making it perfect for medium-sized laboratories.
• Unique thermal microplate holder design eliminates the edge effect; ensures that microplates are heated evenly.
• Accurate temperature uniformity offers high reliability for assays requiring elevated temperatures.
• Powerful variable-speed orbital shaker ensures efficient mixing for even very viscous liquids.
• Shaking motion enhances the reaction in wells and reduces incubation times, increasing throughput and productivity
• Calibration And Protocol Documentation
• Suitable for timed as well as continuous applications
• Digital microprocessor based controllers for precise temperature control
• Easy to read, digital LED/LCD display for actual and set parameters

 

Construction Details:

Constructed of SS 304. The plexi glass canopy makes it possible to inspect specimen without disturbing the temperature. Powerful air circulation creates positive air flow through the incubator. Clamps to hold the flasks are also made of SS.
Temperature Control:
Temperature is controlled by programmable micro-processor based temperature controller cum indicator.
RPMRPM is controlled by digital RPM controller cum display
Temperature Range:3°C above ambient to 69°C

 

Applications:

• Lab applications
• DNA hybridization

 

Product Details:

The Hybridization Incubator from WEIBER is an ideal laboratory instrument for hybridization of transfer membranes used in Southern and Northern blotting techniques. This scientific equipment has been designed to create the ideal laboratory condition suitable for nucleic acid and protein hybridizations. It is ideal for sterile laboratory testing and where the integrity of the sample must be preserved while heating it to the exact temperature for the right period of time. These simple and versatile instruments are found in applications including nucleic acid hybridizations such as Northern (RNA) blots/hybridizations, Southern (DNA) blots/hybridizations, Western (Protein) blots, and molecular biology assays.It also eliminates the need of water baths and heat sealers.

 

It is equipped with microprocessor which allows precise selection of temperature control. Advanced ventilation design technology used in incubator maintains temperature uniformity and accuracy within ±0.5°C.

 

Special Features:

• Ideal for hybridization of transfer membranes used in Southern and Northern blotting techniques
• Adjustable stroke amplitude and speed
• PID temperature controller provides rapid heating and temperature stability.
• Stainless steel chamber with removable drip pan
• Rotators easily drop-in and lift-out without tools
• Microprocessor allows precise selection of temperature control
• Adjustable RPM knob lets you slow down the rotary wheel for removal of samples
• Prevent overheating: cut heater power in case of temperature runaway
• Durable, light weight and portable.
• Protection of the main body and the circuit board against overheating.
• Corrosion resistant interior and exterior.
• Heated glass door for observation provides a clear view of samples during operation.
• RS 232/485 connectivity.(optional)
• Open and close update on mobile.(optional)
• Data logging system.(optional)
• USB ports for pc connectivity.(optional)
• Temperature chart recorder/printer for printing graphs.(optional)
• HMI+PLC controller (optional)
• Hybridization incubator tubes (optional)

 

Product Details:

A water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. WEIBER reciprocating shaking water bath has an extra control for shaking, which moves liquids around. Shaking feature can be turned on or off. It is designed for a wide range of temperature-controlled shaking protocols, such as Northern and Southern Hybridization, Destaining of gels, Incubation of cells or bacterial cultures as well as Wash Processes. The temperature range, which goes up to 99°C also allows you to use the bath as a Boiling Bath.

 

The Shaking Water Bath is equipped with a PID Controller for easy temperature selection, rapid heat up and excellent stability. A high quality, robust design with a unique shaking mechanism that allows you to easily switch from orbital mode to reciprocating mode by simply reversing the tray.

 

Special Features:

• Microprocessor control with digital LED display and shaker control
• Set temperature (in increments of 0.1°C) and oscillation speed via control-panel touchpad for entry of temperature and shaking speed
• Shaking frequency: 30 to 200 oscillations/min.
• Stroke length adjustable at 0.5, 1.0 or 1.5in. (13, 25 or 38mm)
• Microprocessor-controlled proportional integral temperature control and solid-state sensing probe provide excellent temperature sensitivity
• over temperature protection capability
• Automatic motor shutdown capability
• with adjustable high-limit thermostat and indicator light
• Rugged stainless-steel interior with easy-to-clean epoxy powder-coated exterior
• HMI+PLC controller (option)
• Printer report program(optional)
• RS 232/485 interface (optional)
• USB ports (optional)
• Real time data acquisition system (optional)
• profile control(MULTIPLE PROGRAMMING) (optional)
• timer (optional)

Product Details:

WEIBER HEPA filtered anaerobic culture incubator/chamber is specially designed to be used with oxygen sensitive materials, product containment needs, anaerobic bacteria culture and/or general isolation control. These units allow researchers to easily process, culture and examine samples without exposure to atmospheric oxygen.

 

The use of a portable incubator when working with any bacterial culture is very helpful. When trying to prevent serious infection or even death, mistakes cannot be made and precision and accuracy are of the utmost importance.

 

Anaerobic bacteria cultures are performed to identify bacteria that grow only in the absence of oxygen and which may cause human infection. If overlooked or killed by exposure to oxygen, anaerobic infections result in such serious consequences as amputation, organ failure, sepsis, meningitis, and death. Culture is required to correctly identify anaerobic pathogens and institute effective antibiotic treatment.

 

Special Features:

• Adjustable internal shelving
• Stainless steel enclosure is easy to clean and disinfect
• Arm ports accept a wide variety of gloves,
• Available in various designs
• External fluorescent or UV lighting
• Can accommodate upto 600 plates
• Fitted with HEPA filtration system: All the atmosphere passes through the filter every four seconds, which ensures the chamber environment is cleaned quickly
• Levels of atmospheric cleanliness inside the workstation exceed the requirements of ISO 14644 Class 3.
• Fitted with a removable front to facilitate thorough cleaning, easy replacement of the HEPA filter, and the transfer of bulk samples and larger pieces of equipment for use in the workstation.
• The internal atmosphere is circulated continuously - contributing to even temperature distribution and ensuring any internal particulates will be in motion before capture by the filter.
• Fitted with patented oval ports, equipped with sleeves and cuffs, which provide greater freedom of movement and operator comfort.
• Fully integrated gas control avoids bulky add-on systems and reduces the need for additional bench space.
• Clear backlit LCD display
• HMI display (optional)

 

Product Details:

The Hybridization Incubator from WEIBER is an ideal laboratory instrument for hybridization of transfer membranes used in Southern and Northern blotting techniques. This scientific equipment has been designed to create the ideal laboratory condition suitable for nucleic acid and protein hybridizations. It is ideal for sterile laboratory testing and where the integrity of the sample must be preserved while heating it to the exact temperature for the right period of time. These simple and versatile instruments are found in applications including nucleic acid hybridizations such as Northern (RNA) blots/hybridizations, Southern (DNA) blots/hybridizations, Western (Protein) blots, and molecular biology assays.It also eliminates the need of water baths and heat sealers.

 

It is equipped with microprocessor which allows precise selection of temperature control. Advanced ventilation design technology used in incubator maintains temperature uniformity and accuracy within ±0.5°C.

 

Special Features:

• Ideal for hybridization of transfer membranes used in Southern and Northern blotting techniques
• Adjustable stroke amplitude and speed
• PID temperature controller provides rapid heating and temperature stability.
• Stainless steel chamber with removable drip pan
• Rotators easily drop-in and lift-out without tools
• Microprocessor allows precise selection of temperature control
• Adjustable RPM knob lets you slow down the rotary wheel for removal of samples
• Prevent overheating: cut heater power in case of temperature runaway
• Durable, light weight and portable.
• Protection of the main body and the circuit board against overheating.
• Corrosion resistant interior and exterior.
• Heated glass door for observation provides a clear view of samples during operation.
• RS 232/485 connectivity.(optional)
• Open and close update on mobile.(optional)
• Data logging system.(optional)
• USB ports for pc connectivity.(optional)
• Temperature chart recorder/printer for printing graphs.(optional)
• HMI+PLC controller (optional)
• Hybridization incubator tubes (optional)

 

Product Details:

The Low Temperature Incubator, often known as BOD incubators are designed to provide excellent temperature uniformity for a wide range of applications requiring low temperature conditions. They are most commonly employed for BOD determinations, fermentation studies, bacterial culturing, plant and insect studies, stability tests and other low temperature applications including desalting of enzyme extracts, serological and complement fixation tests, preservation of vaccines, animal and plant cell culturing etc. and often serve as bacteriological incubators, tissue culture incubators, hospital incubators and scientific incubators.

Acmas Technologies Pvt. Ltd. is a leading manufacturer and exporter of these low temperature incubators in India, offering a wide range of products in both standard as well as customized models. The company offers highly versatile and economical temperature controlled incubators at affordable prices, specifically designed to meet the requirements of the industry. These highly efficient laboratory incubators use high quality construction materials such as anodized aluminium and epoxy powder coated MS sheets for a highly reliable and sturdy construction. They come equipped with adjustable shelves that can be rearranged with ease, allowing easy placement and segregation of differently sized samples. These double walled insulated cabinets are designed for maximum space efficiency and are available as both floor-mounted as well as bench-top models.

 

Features:

These laboratory incubators can operate across a very wide temperature range, ranging from 2°C to 90°C with an accuracy of +/- 0.5°C. They use PID microprocessor based controllers for efficient temperature control and an integrated LED display for displaying the set-point and actual temperatures. The efficient thermostat provides highly precise control of the working temperature and ensures repeatability of the test conditions. The equipment uses efficient fans and motor for circulating the heated air in a uniform air flow pattern. It uses forced air circulation system for maintaining uniform air circulation, ensuring greater temperature homogeneity within the equipment. These low temperature incubators also use an efficient refrigeration system and hermetically sealed compressors for efficient cooling. The compressor depresses the temperature below ambient, whereas the heater elevates the temperature to bring it back to ambient, therefore providing highly precise control of the working temperatures. The refrigerator incubators can also provide cooler temperatures for certain cell cultures that require refrigeration.

The bio-chemical oxygen demand incubators from Weiber also come equipped with a wide array of safety features including an over temperature safety controller, a circuit breaker to protect the equipment from electrical overload and alarms and indicators for out of spec parameters. The BOD incubators may also come equipped with an efficient illumination system for adequate illumination of the interiors. The front insulated door may also be provided with a lock and key arrangement for added safety.

Key Features:

• Highly reliable and safe operation
• Double walled insulated cabinet design
• Resistant, non-corrosive and easy to clean surfaces
• Aesthetic design
• P.I.D. temperature control
• Microprocessor control system
• Repeatability of test conditions
• Interior electrical outlet
• Hermetically sealed compressor
• LED Display of set-point and chamber temperature
• Independent safety over temperature protection
• Fan assisted / Forced air circulation

 

Product Details:

WEIBER Biochemical Oxygen Demand (BOD) incubators or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. BOD incubators facilitate the storage of wastewater samples, and can accommodate from 62 – 565 BOD bottles.

 

Special Features:

• Microprocessor based temperature regulator(HMI+PLC as an option)
• CFC free refrigeration unit
• RS232 interface incorporated
• Calibration and protocol documentation
• Castor wheels for ease in movement.
• Providing fast and accurate results
• Digital Display Temperature
• Safety Thermostat
• Push-button controls for temperature set point selection
• Forced-air circulation delivers excellent temperature stability
• Easy-to-clean, corrosion-resistant construction
• Compressor relay conserves energy
• Full opening door with silicon gaskets hinged on left side
• Heated viewing window

 

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• IR Sensor/ Micro Switch Based Door open Alarm. Adjustable or fixed 30s delay before alarm
• Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• R.F based Remote Alarm System
• Built-in chart recorder.
• Real time data acquisition system.

 

Applications:

• B.O.D. Determinations
• Plant and Insect Studies
• Enzyme assays
• Drug stability tests
• Fermentation Studies
• Bacterial Culturing

 

 

Product Details:

The LED incubators from WEIBER are dual chambers units that use an LED radiation system to provide optimum and adequate illumination within the incubator, without generating excess heat, facilitating its use for various low temperature applications. They are commonly employed as LED light growth incubators for low temperature testing of products, tissue culture applications, seed germination studies, breeding tests etc.

 

The LED light incubators from Weiber are employed for a wide range of temperature sensitive applications and find widespread usage in various research laboratories and industrial units. They are available in various standard designs and configurations and can be completely customized as per specific requirements. They are highly versatile equipments that come equipped with a wide range of accessories to suit the requirements of specific applications. They are available as easy to install, portable units that are designed for maximum space efficiency and feature optimum storage area within a compact design. Most of the models also come equipped with removable, easy to clean shelves to allow processing of large batches of different samples.

 

Special Features:

• Consists of independent, modular, water-proof lamp banks that can be conveniently expanded for accommodating a large sample size.
• Light banks can be controlled individually, allowing complete flexibility in terms of intensity and the area of illumination.
• Features top-mounted or side-mounted LED lights that are appropriately positioned within the chamber to provide uniform illumination throughout the working area.
• Equipped with a light wave control function for controlling the illumination levels.
• Energy efficient
• Microprocessor based temperature controller for highly precise and consistent temperature control.
• Automatically switches to the cooling mode in case of overheating and start heating up once the temperature drops below the set levels.
• Provided with an over-temperature protection function that prevents the working temperatures from exceeding beyond the set limits.
• Digital LED display for displaying the set and working temperatures.
• uses efficient fans and motor for maintaining a uniform air circulation
• low noise and vibration free operation
• CFC free refrigeration unit
• Surfaces with highly resistant and non-corrosive powder coat finish
• Portable
• Easy installation
• Versatile usage
• CE Approved

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• IR Sensor/ Micro Switch Based Door open Alarm. Adjustable or fixed 30s delay before alarm
• Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• R.F based Remote Alarm System
• Built-in chart recorder.
• Real time data acquisition system.

 

Product Details:

The LED incubators from WEIBER are dual chambers units that use an LED radiation system to provide optimum and adequate illumination within the incubator, without generating excess heat, facilitating its use for various low temperature applications. They are commonly employed as LED light growth incubators for low temperature testing of products, tissue culture applications, seed germination studies, breeding tests etc.

 

The LED light incubators from Weiber are employed for a wide range of temperature sensitive applications and find widespread usage in various research laboratories and industrial units. They are available in various standard designs and configurations and can be completely customized as per specific requirements. They are highly versatile equipments that come equipped with a wide range of accessories to suit the requirements of specific applications. They are available as easy to install, portable units that are designed for maximum space efficiency and feature optimum storage area within a compact design. Most of the models also come equipped with removable, easy to clean shelves to allow processing of large batches of different samples.

 

Special Features:

• Consists of independent, modular, water-proof lamp banks that can be conveniently expanded for accommodating a large sample size.
• Light banks can be controlled individually, allowing complete flexibility in terms of intensity and the area of illumination.
• Features top-mounted or side-mounted LED lights that are appropriately positioned within the chamber to provide uniform illumination throughout the working area.
• Equipped with a light wave control function for controlling the illumination levels.
• Energy efficient
• Microprocessor based temperature controller for highly precise and consistent temperature control.
• Automatically switches to the cooling mode in case of overheating and start heating up once the temperature drops below the set levels.
• Provided with an over-temperature protection function that prevents the working temperatures from exceeding beyond the set limits.
• Digital LED display for displaying the set and working temperatures.
• uses efficient fans and motor for maintaining a uniform air circulation
• low noise and vibration free operation
• CFC free refrigeration unit
• Surfaces with highly resistant and non-corrosive powder coat finish
• Portable
• Easy installation
• Versatile usage
• CE Approved

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• IR Sensor/ Micro Switch Based Door open Alarm. Adjustable or fixed 30s delay before alarm
• Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• R.F based Remote Alarm System
• Built-in chart recorder.
• Real time data acquisition system.

 

Product Details:

The incubator shakers from Weiber are designed to provide a highly precise and controlled temperature environment for all kinds of laboratory shaking requirements. These equipments are most commonly employed for the shaking of microbial cultures and mixing of reagents and solvents, entomology studies, hybridization washes, staining and de-staining of gels and other laboratory applications requiring incubation and shaking of samples. They find widespread usage in microbiology and biotechnology research laboratories and chemical laboratories. The Weiber shaking incubators come equipped with a built-in orbital shaker that provides orbital agitation at variable speeds for maintaining adequate aeration for optimum growth of cell cultures. The equipment offers precise control over the agitation speed and the orbit of agitation for uniform and adequate mixing of cultures and solubility studies.

 

These incubator shakers are commonly available as smaller bench top models that can easily fit into compact laboratory spaces. The equipment features a unique retractable platform to allow easy loading and unloading of samples and may also come equipped with interchangeable platforms with varying size clamps, test tube holders and other accessories to accommodate both small and large size flasks as well as smaller test tubes. They also come equipped with efficient heaters for rapid heating of the samples and faster temperature recovery upon opening of the chamber door. The equipment is also provided with powerful convection fans that help in maintaining continuous air circulation within the chamber for uniform distribution of heat. The units operate across a wide temperature range, ranging from +5°C to 60°C, allowing highly flexible and versatile application of the equipment.

 

Features:

These bench top metabolic shakers use microprocessor based controllers for highly precise and accurate control of working temperature, running time and the rotation speed, allowing reproducibility of the constant temperature environment for repeated tests. The incubators use timers that can be set for 99 hours and are equipped for hold for long runs, for setting the time of operation. They are equipped with highly efficient and practically maintenance free brushless motor for precise control of the rotation speed. The units use triple-eccentric counter balanced shaking mechanism for smooth, quiet, dependable and long-lasting operation. These precision incubator shakers use digital PID controllers with an LED display to allow easy monitoring of the actual and set working conditions and accurate set-point regulation and are equipped with easy to use control buttons for setting of the operating parameters.

 

These orbital shakers also come equipped with independent controls for temperature, timer and shaker and are provided with audio and visual alarms that alert the user in case of out of spec operating parameters. They are also equipped with various safety devices including an over-temperature protection feature and safety thermostats that ensure safe and reliable operation of the equipment. They are designed in accordance with international standards of quality and safety and come equipped with ISO certification.

 

Product Details:

The incubator shakers from Weiber are designed to provide a highly precise and controlled temperature environment for all kinds of laboratory shaking requirements. These equipments are most commonly employed for the shaking of microbial cultures and mixing of reagents and solvents, entomology studies, hybridization washes, staining and de-staining of gels and other laboratory applications requiring incubation and shaking of samples.

 

The shaking incubators come equipped with a built-in orbital shaker that provides orbital agitation at variable speeds for maintaining adequate aeration for optimum growth of cell cultures. The equipment offers precise control over the agitation speed and the orbit of agitation for uniform and adequate mixing of cultures and solubility studies.

 

These are commonly available as smaller bench top models that can easily fit into compact laboratory spaces. However we have the ability to customize the size and feature as per individual requirements.

 

Special Features:

• a unique retractable platform to allow easy loading and unloading of samples
• Equipped with interchangeable platforms with varying size clamps, test tube holders and other accessories to accommodate both small and large size flasks as well as smaller test tubes.
• Features efficient heaters for rapid heating of the samples and faster temperature recovery upon opening of the chamber door
• Provided with powerful convection fans that help in maintaining continuous air circulation within the chamber for uniform distribution of heat.
• use microprocessor based controllers for highly precise and accurate control of working temperature
• timers that can be set for 99 hours
• Highly efficient brushless motor for precise control of the rotation speed.
• Triple-eccentric counter balanced shaking mechanism for smooth, quiet, dependable and long-lasting operation.
• LED /LCD display to allow easy monitoring of the actual and set working conditions
• Independent controls for temperature, timer and shaker
• Over temperature protection function for safe and reliable operation
• Quiet, dependable and long lasting operation
• ISO certified
• HMI+PLC controller (optional)

Construction Details:

• Outer construction of PCRC sheet duly pre treated with primers and inner is Constructed of SS 304. The plexi glass canopy makes it possible to inspect specimen without disturbing the temperature. Powerful air circulation creates positive air flow through the incubator. Clamps to hold the flasks are also made of SS.
• Temperature Control: Temperature is controlled by programmable micro-processor based temperature controller cum indicator.
• RPMRPM is controlled by digital RPM controller cum display (250 RPM)
• Tray (Platform): suitable for 16 flasks of 100ml, 12 flasks of 250ml, 9 flasks of 500ml & 4 flasks of 1000ml
• Temperature Range: 50C above ambient to 600C

Applications:

• bacteria cultures
• yeast cultures
• entomology studies
• egg hatching
• hybridization washes
• mixing
• metabolism and solubility study
• incubation as well as shaking tests

 

Product Details:

Shaking incubators from Weiber are highly versatile equipments that are designed for all kinds of laboratory shaking and incubator applications, including microbial cell cultures, entomology studies, solubility tests, metabolism studies, stability tests, hematological studies, food processing, quality control and analysis, mixing of reagents and various other laboratory applications.

 

The equipment features an advanced shaking mechanism, designed for minimum noise, vibration free shaking that provides precise control of the rotation speed for adequate agitation and mixing of the samples. These high quality incubator shakers are suitable for timed as well as continuous, heavy duty applications. They come equipped with various platforms and variable flask and tube support for accommodating various types and sizes of vessels, including flasks, beakers, bottles and test tubes.

 

These equipments are commonly employed as culture incubator shakers and are used for incubation, fermentation and cross-breeding of bacteria for environmental studies and medical research. They use orbital agitation at variable speeds for maintaining adequate cell aeration for optimum cell cultures.

 

Special Features:

• Advanced shaking mechanism for adequate agitation and aeration
• Suitable for timed as well as continuous applications
• Digital PID microprocessor based controllers for precise temperature control
• Easy to read, digital LED/LCD display for actual and set parameters
• An over-temperature protection feature with independent thermostat
• Beltless Drum Mechanism for increased efficiency
• Brushless DC motor for reduced noise and trouble-free, long-lasting operation
• Can be timed or runs in continuous mode
• Timer for setting operating time up to 99 hours
• An interlock stops motion when the door is open
• Shelf located at upper part of chamber, and Shaker at lower part of chamber
• Variable Flask & Tube Support
• Light Bank for illumination
• ISO certified

 

Product Details:

The multi-functional Large tube rotator shaker from WEIBER is designed to Incubate, Rotate, Rock, and Shake all in ONEcompact unit. This unit maintains precise temperature control and uniformity – ranging from 28°C to 75°C. Magnetic stainless steel platform may be easily set to rock or rotate almost any container. Containers can be easily mounted on the magnetic platform with magnetic clips orstrips. This unit is also ideal for Hybridization. Chamber air is gently and continuously re-circulatedensuring temperature consistency and uniformity. A variety of accessories are available to providemaximum application versatility.

Special Features:

• Compact and lightweight.
• Magnetic Rotating/Rocking Platform & Clip Plate System holds almost any container at any angle.
• Expansion kits available for increased capacity and different containers.
• Viewing Window to inspect samples without affecting chamber environment.
• RS232 Port for computer control &/or data logging.
• Chamber air is gently & continuously recirculated ensuring temperature consistency and uniformity.
• Economical, Space Saving and Secure.
• An 3-D Orbital Shaker Attachment turns the unit into a 3-D Shaking Incubator.(OPTIONAL)
• crystal-clear backlit LCD displays all parameters in any lighting conditions at a glance
• Two Integrated High Speed/Low Speed Magnetic Stirrers
• Programmable Timers and Alarms for temperature and/or mixing Ideal for hybridization
• Horizontal Orbital Attachment is ideal for Western Blots and maintaining cells or solutions in suspension(optional)

Optional Accessories:

• 6 Clip Plates For 12 Each 10-13mm Tubes: Pack of 6 metal clip plates to accommodate up to 12 tubes with a diameter of 10-13mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform.
• 6 Clip Plates For 6 Each 15-17mm Tubes: Pack of 6 metal clip plates to accommodate up to 6 tubes with a diameter of 15-17mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform.
• 6 Clip Plates For 3 Each 28-30mm Tubes: Pack of 6 metal clip plates to accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform.
• Clip Plate 10-13mm Tubes: One metal clip plate to accommodate up to 12 tubes with a diameter of 10-13mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform.
• Clip Plate 15-17mm Tubes: One metal clip plate to accommodate up to 6 tubes with a diameter of 15-17mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform.
• Magnetic Stainless Steel Bag Strip (pack of 16): Tube Holder holds six 50mL tubes vertically. Holder snaps on to any Vortex-Genie 2 mixer. No additional attachment necessary.
• Expansion Kit (Two Stainless Steel Trays, 24 Magnetic Bag Mounting Strips): Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic Platform
• 2 Clip Plates For Hybridization Tubes: Pack of 2 metal clip plates to accommodate one 35mm ID Hybridization Tube up to 300mm in length.
• Stackable Wire Rack: Stackable Wire Rack may be used in the Enviro-Genie and the Incubator Genie to increase shelf space for use as a temperature controlled chamber. Two wire racks will fit inside the chamber to provide 3 levels for containers.

Product Details:

The large size shaking incubators from Weiber are large capacity combined incubator shakers that can easily accommodate six 2L flasks within their 115 litres of available capacity and are still compact enough to be positioned on laboratory benches. These equipments come equipped with heavy duty orbital shaking mechanisms to ensure smooth shaking even with maximum sample load. They feature triple eccentric counter balanced shaking mechanism for uniform motion, quiet and dependable long lasting operation and high stability even with an uneven sample load due to differently sized flasks.

 

These incubator shakers have a sturdy and reliable construction and feature an easy to open lid for a more convenient and efficient set-up. The equipment features a unique retractable platform that can be drawn forward outside the chamber, allowing easy loading and unloading of samples and providing better access to the far-to-reach samples kept at the back. The platform is locked in place once the unit is operational. The incubator shakers also come equipped with versatile clamping system with variable flasks and tube support, accommodating assorted flasks of different sizes, ranging from 50ml to 6 L in capacity. They are also provided with angle adjustable accessory tube racks with magnetic locking system for quick coupling and de-coupling of the samples.

 

Features:

These incubator shakers use digital PID microprocessor based controllers for highly accurate working conditions and precise control of the temperature, speed and running time. The equipment is also provided with a user friendly key pad and an easy to read LCD display for displaying the working temperature and shaking speed, allowing easy monitoring of the actual and set parameters. The units either run in continuous mode or they can be timed for specific applications. The equipment comes equipped with an integrated timer that can be set up to 99 hours for timing of the operation. These orbital shakers offer highly precise control of the orbital speed and the orbit of rotation, optimising the shaking action for mixing of even very small samples.

 

The incubator shakers come equipped with various safety devices including an over temperature protector with independent thermostat and door detector. The over temperature protection feature prevents the working temperatures from exceeding beyond set values, whereas the door detector stops the shaking motion once the door is open and resumes shaking upon closing of the chamber door. The units also come equipped with interior chamber lights for enhanced visibility and use efficient heaters and powerful convection fans for maintaining uniform temperature conditions within the incubator. They are provided with audio and visual alarms for alerting the user in case of out of spec parameters.

 

Key Features:

• Small Table size design
• Unique retractable platform for easy loading and unloading
• Angle adjustable accessory tube racks with magnetic locking system for quick coupling and de-coupling
• Designed for safe and reliable operation
• Microprocessor based controllers
• Digital PID temperature controller
• Independent controls for timer, shaker and temperature
• Digital display for temperature and speed
• Maintenance free brushless DC motor
• 10RPM slow speed Support
• Beltless Drum Mechanism
• Variable flask & Tube Support
• Light Bank
• Easy to use key pad

 

Product Details:

The multi purpose shaking incubators from Weiber are highly versatile equipments that are designed for all kinds of laboratory shaking and incubator applications, including microbial cell cultures, entomology studies, solubility tests, metabolism studies, stability tests, haematological studies, food processing, quality control and analysis, mixing of reagents and various other laboratory applications. The equipment features an advanced shaking mechanism, designed for minimum noise, vibration free shaking that provides precise control of the rotation speed for adequate agitation and mixing of the samples. These high quality incubator shakers are suitable for timed as well as continuous, heavy duty applications and find widespread usage in scientific and research laboratories that are involved in microbiology studies, biotechnology research, biological research, chemical studies, enzyme reaction studies, immunology studies etc. They come equipped with various platforms and variable flask and tube support for accommodating various types and sizes of vessels, including flasks, beakers, bottles and test tubes.

 

These equipments are commonly employed as culture incubator shakers and are used for incubation, fermentation and cross-breeding of bacteria for environmental studies and medical research. They use orbital agitation at variable speeds for maintaining adequate cell aeration for optimum cell cultures. The equipment provides highly stable temperatures and offers complete flexibility in terms of speed and orbit of agitation to accommodate the incubation requirements of different cell types. The units use PID microprocessor based controllers for precise temperature control, ensuring highly accurate and optimum working temperatures. They also come equipped with an easy to read digital LED display for displaying the actual and set temperatures for added ease of monitoring. The Weiber multi-purpose shaking incubators are also provided with an over-temperature protection feature with independent thermostat to prevent the temperatures from rising beyond the set levels.

 

Features:

The Weiber hydroponics chambers come equipped with PID microprocessor controllers for highly precise control of temperature, humidity, CO2 concentration and other operational parameters. They use PLC based HMI interactive control panel for maintaining the accurate and optimum temperature levels. The units are also provided with temperature sensors for continuous monitoring of the working temperature and non-dispersive infrared gas sensors for accurate estimation of the CO2 concentration within the equipment. These growth chambers are also provided with efficient fans and motor, designed for no-vibration and noise-less operation. They help in maintaining a uniform air flow through continuous air circulation, ensuring uniform distribution of temperature and humidity for optimum plant growth.

The equipment uses an indirect heating system comprising of stainless steel sheathed air heaters for maintaining positive temperatures within the chamber and an efficient cooling unit comprising of ultra-low temperature application compressors and non-CFC eco-friendly refrigerant for maintaining the desired low temperature levels. The equipment uses hermetic and semi-hermetic compressors and a cascade refrigeration system for efficient cooling of the equipment.

Product Details:

The programmable large size shaking incubators from Weiber are high precision incubator shakers that provide a highly controlled environment for various cell culturing procedures and are ideal for suspension culture applications. They combine the functions of incubators and shakers for increased efficiency and come equipped with programmability, active heating and cooling, illuminated controls and active insulation as part of the standard features. The equipment uses a convenient intuitive programming that allows programmable operation of multiple parameters including temperature, speed and illumination. The operating parameters can be timed for specific applications and are easy to change as per the requirements. These equipments are ideal for temperature reductions or heat inductions for slowing or accelerating the cell growth and are ideally used for culturing of bacterial, yeast, insect and plant cells.

These culture incubator shakers use high quality construction materials for a rigid and sturdy construction and highly resistant external and internal surfaces and feature an easy to open lid for added convenience. The design also includes a heavy duty door gasket that completely isolates the internal chamber from external contaminants and protects the internal environment from temperature fluctuations. These equipments are ideal for large load requirements and come equipped with heavy duty, orbital shaking mechanisms for smooth, trouble free, operation. They use a brush less DC motor and triple eccentric drive for low noise operation and long shaker life.

Features:

These large capacity incubator shakers can accept both smaller flasks of 50ml capacity as well as large flasks with a capacity of up to 6L. They are compact enough to be used as bench top models and can also be operated as regular floor mounted units. The equipment features a unique retractable platform that allows easy loading and unloading of samples and also comes equipped with clamps, test tube holders and other accessories to allow mounting of flasks, test tubes and beakers of various sizes. The equipment can be used for continuous shaking or it can be timed for specific applications.

These incubator shakers use programmable PID microprocessor based controllers for highly precise control of the operating parameters and an integrated digital display for accurate set point regulation. It comes equipped with audio and visual alarms for alerting the user in case of set point deviations. The equipment is provided an easy to use key pad that allows direct calibration of speed and temperature for increased accuracy. It also comes equipped with lamp banks for adequate illumination of the interiors.

The equipment also features a superior air circulation system comprising of efficient heaters and powerful convection fans. The heaters provide faster heating for rapid temperature equilibrium, whereas the fans maintain uniform air circulation for increased temperature homogeneity.

Key Features:

• Small Table size design
• Unique retractable platform for easy loading and unloading
• Designed for safe and reliable operation
• Microprocessor based controllers
• Digital PID temperature controller
• Independent controls for timer, shaker and temperature
• 4 step speed program
• 10 step Speed program
• Digital display for temperature and speed
• Maintenance free brushless DC motor
• 10RPM slow speed Support
• Beltless Drum Mechanism
• Variable flask & Tube Support
• Light Bank
• Easy to use key pad

Product Details:

The programmable multi-purpose shaking incubators from Weiber are one of the most versatile incubator shakers that are used for a wide variety of laboratory and industrial applications that require incubation as well as shaking of the samples. Designed for programmable operation, these equipments use state of the art technology for superior performance and flexible operation. They feature a small table size design with a unique retractable platform for easy loading and unloading of samples. Their space efficient design provides large-capacity shaking for small sized laboratories that cannot accommodate larger units. These shaker incubators also come equipped with variable size clamps, test tube holders and other accessories for holding small and large flasks and even smaller test tubes.
 
incubator shakers allow programming of multiple parameters including agitation speed, working temperature and illumination of the equipment based on the timer settings. They also allow automated changes in the operating parameters for highly precise and accurate working conditions. The equipment uses microprocessor based controllers for precise control of various working parameters and digital PID temperature controller for accurate temperature control. The units are also provided with a digital LED display for displaying the working temperature and rotation speed.
 
Features:
bench-top incubator shakers from Weiber use high quality construction materials for a sturdy and rugged construction.  These equipments operate across a dynamic speed range and can be timed for fixed shaking time or continuous shaking. The timer allows setting up to 99 hours and can also hold for continued incubation. These metabolic shakers use a low maintenance DC motor for controlling the speed of orbital agitation. They are also provided with heaters and efficient convection fans for faster heating and recovery of temperature and maintaining a uniform temperature distribution throughout the chamber.
These orbital shakers come equipped with interior chamber lights for adequate illumination of the interiors. They are also provided with audio and visual alarms that alert the user in case of temperature and speed deviations. All the models come equipped with standard safety devices including an over-temperature detection feature and open door detectors for safe and reliable operation of the equipment. The equipment features an easy to use key pad that allows direct calibration of temperature and the rotation speed. The incubator shakers are provided with independent controls for the timer, shaker and temperature and are designed to allow load flexibility. They are designed for safety, reliability and repeatability and come equipped with CE certification.
These incubator shakers are highly versatile equipments that provide highly precise control over the operating parameters, allowing its use for flexible operations. They are used for a wide variety of applications including microbial culturing, mixing of reagents and solvents, solubility studies, entomology studies, hybridization washes, hatching of eggs and various other research applications and are commonly employed as metabolic shakers, micro plate shakers and plate shakers.
 
Key Features:

Small Table size design

Unique retractable platform for easy loading and unloading

Designed for safe and reliable operation

Microprocessor based controller

Digital PID temperature controller

Independent controls for timer, shaker and temperature

Digital display for temperature and speed

Maintenance free brushless DC motor

 

Product Details:

The bacteriological incubators from WEIBER is designed to maintain optimal temperature conditions for growth of microbiological cultures in a controlled environment.

 

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various specialized research applications.

 

Special Features:

• Incubators are sturdy double walled units.
• Inner chamber made of S.S and outer made of PCRC.
• Gap between the walls fitted with glass wool insulation to avoid heat loses.
• Microprocessor based temperature control.
• Calibration And Protocol Documentation
• LCD/LED display
• Efficient air circulation
• low noise and vibration free operation
• Versatile usage
• CE Approved

Optional Features:

• External Keyed Alarm Mute. Alternate: Supervisor programmable code
• Door Buzzer alarm
• IR Sensor/ Micro Switch Based Door open Alarm. Adjustable or fixed 30s delay before alarm
• Power failure alarm: Automatic Power detection and Audio Visual Alarm.  Adjustable or fixed 15 min delay before alarm. Battery backup: Automatic Battery Charging Facility inbuilt in circuit. Provides up to 24 hr of display power
• Programmable temp range: Touch Button Control to Program Temperature. User Settable.
• Dual PT-100 sensor With Ambient Sensing by Semi-conductor Temperature Sensor.
• Dry contacts (Remote Control) for central alarming.
• R.F based Remote Alarm System
• Serial Thermal Printing facility.
• 24 hr non-volatile temperature Record Storage Capacity, and Record Download facility in MS-WORD/Hyper terminal / MS-Excel.

 

Applications:

• Plant Cell Growth
• Fermentation Studies
• Bacterial Culturing
• Mycology Studies

 

 

Product Details:

We are manufacturers of Metabolic Shakers, Incubator shaker or orbital shakers in India since 1990. Our incubator shakers are widely used for day to day bacteriological and varied laboratory applications requiring incubation as well as shaking tests and procedures in variety of research and testing laboratories.

 

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Over a short period of time Weiber brand have been established as reliable exporters of Incubator Shakers in India, catering to the vast markets in South East Asia, Middle East, Africa and Europe.

 

Apart from that we are supplying our Incubator shaker in India, catering to a variety of customers ranging from Defence Installations, Research Laboratories, Educational Institutes and various R and D laboratories of leading national and multinational companies.

 

Sailent Features:

• Versatile usage
• Ergonomic Design
• Energy Efficient
• Long life
• Low Maintenance
• Calibration And Protocol Documentation

 

Construction:

Our metabolic shakers are double walled convection heated and cooled units. Outer body of our metabolic shakers are constructed out of thick stainless steel sheet combined with heavy gauge Perspex sheets. The unit is provided with top opening door/opening, made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with one stainless steel shaking rack. Our metabolic shaker is provided with natural air convection mechanism to uniformly regulate the temperature of the inside chamber.

Shaking Platform:

The standard model of our orbital shaker has a plat form size of 500mm x 500mm and it can withhold 16-20 flasks of 250ml or 500 ml. However this can be modified to suit the individual customer’s requirements.

Shaking System:

The efficient and diligent shaking system of our incubator shaker has a orbital shaking movement which is powered by a reliable crompton greaves motor of suitable power and wattage.

Shaking Speed:

The shaking speed of our standard model variable speed incubator shaker is between 80 RPM to 400 RPM. However we can customize the speeds as per the individual requirements of the user.

Speed Control:

The orbital shaking in our orbital shakers is controlled by a DC drive which in turn is controlled through micro processor based digital speed controller cum RPM indicator with great accuracy.

Heating

Indirect heating system is provided in our incubator shakers, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage.. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity.

An energy efficient cooling unit is installed in our incubator shaker to enable incubation and shaking of the specimens at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines.

 

Humidity

Humidity generation provision can be incorporated as an optional feature if desired by the customer. The humidity is generated by means of aerosol humidity generator with efficient humidity controller cum indicator.

Humidity Range:

From Ambient to 90% (As per the temperature Requirements).