Aging Test Chamber

Calorimetric Test Chamber is used for quantitative and qualitativeinvestigations of energy expenditure for routine fuel tests or for occasional calorific tests. It measures heat release rate, smoke release, ignition time, oxygen consumption, carbon dioxide and carbon monoxide generation, mass loss rate.

The entire range we offer is highly reliable and stable for being produced as per the latest market trends & using premium raw-materials. Our Calorimeter Test Chambers are built into a single, compact cabinet to provide a self-contained operating unit producing reliable results with good repeatability. The durable ergonomic design promotes one-hand, one-touch operation so sample measurements are taken in seconds. The Chamber also known as Fuel Test Chamber.

Standards:

• ISO 5660
• ASTM E1354
• ASTM E1474
• ASTM E1740
• ASTM F155.
• ASTM D6113
• CAN UL 135
• BS 476 PART 15.
• Customer defined.

Special Features:

• 19 inches analysis rack (customizable).
• Automatic Spark Igniter to facilitate measurement of ignition time.
• Auto Split Shutter automatically opened to transmit radiation to the sample.
• Absorber-type glass protection door to facilitate sample observation during test and opening and closing
• Gas Analyzer to exactly measure O2, CO, and CO2 concentrations up to 0.02%.
• Port, heated filter, and heated line to measure toxic gases.
• MFC(Mass Flow Controller) used for all gas flows, improving accuracy of and automatically controlling flux.
• Easy to clean, smooth, non-corrosive surfaces
• Separate data acquisition system (optional).
• Microprocessor temperature/humidity programmer.
• Colour touch panel.
• HMI+PLC in one unit
• Door open and Door close alarm system.
• Inbuilt printer for printing graphs.
• Cfc Free Refrigeration Unit For Low Temperature Applications:
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber - Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Vewing Window - Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Circulation Fan with Variable Speed -
  
  • Electrical efficiency
    Variable speed motor saves money by reducing energy bills, as it consumes less electricity than conventional motor.
  • Cooling Efficiency
    Variable speed enables gaining air conditioning efficiency or SEER.
  • Air Quality
    Variable speed motor helps clean the air efficiently. When the fan is in constant operation (indicated by the "Fan" setting on thermostat), the motor continues to slowly circulate air, allowing filters to capture more contaminants.
  • Humidity Control
    Variable speed motor combined with a Thermostat allows controlling the amount of humidity.
  • Quieter Operation
    Variable speed blower motor are significantly quieter thanits single-speed counterpart.
• Air Cooled Refrigerated System - Air cooled refrigeration system offer various benefits like
  
  • low fan power consumption
  • resistant to corrosion and freezing conditions
  • requires very low maintenance
  • Guaranteed long life operation
• PCRC Sheet Body - Powder coated steel body assures corrosion resistant chamber and allows working of chamber at high temperature applications.

Product Details:

Weiber Altitude Test Chambers combine temperature and altitude to test basic components or subassemblies designed for use in a variety of industries. With altitude test chambers, user can control the temperature environment for testing while simulating various altitudes from site level to 100,000 feet (1.12kPa)

High and low Temperature Altitude Test Chamber is used to test temperature and low-pressure altitude conditions simultaneously. All models are factory tested, with an ergonomic and maintenance cum user-friendly design.

These CE approved test chambers are created with multi-layered insulation with double vapor barrier is of low 'K' factor, high density and of non-hygroscopic in nature. WEIBER test chamber are made in accordance with the international standard.

Standard as well as customizable models are available. Walk in models are also available.

Special Features:

• Choice of capacities –4000Lt and as per.
• Safety Devices-A variety of electronic, refrigeration, and cabinet safeties are incorporated into the design, protecting both your product and chamber
• Dual Purpose-Operates as an altitude chamber and separate temperature chamber maximizing your investment
• Robust Vacuum System - High quality capacity vacuum pumps provide reliable performance. Flexible section in vacuum lines also prevents transmission of adverse vibration
• Microprocessor temperature/humidity programmer-Automatic temperature, and altitude control offer ease of use.
• Colour touch panel.
• HMI+PLC in one unit
• Door open and Door close alarm system.
• Inbuilt calibration system.
• Separate Inbuilt printer for printing graphs(optional).
• CFC Free Refrigeration Unit:
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber - Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Fullopening Door with Silicone Gaskets and Hinged on Left Side - Allows ease of complete access to the chamber and opening of door with less force; durable silicon gasket reduces temperature loss.
• Heated Vewing Window - Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Circulation Fan with Variable Speed -
  
  • Electrical efficiency
    Variable speed motor saves money by reducing energy bills, as it consumes less electricity than conventional motor.
  • Cooling Efficiency
    Variable speed enables gaining air conditioning efficiency or SEER.
  • Air Quality
    Variable speed motor helps clean the air efficiently. When the fan is in constant operation (indicated by the "Fan" setting on thermostat), the motor continues to slowly circulate air, allowing filters to capture more contaminants.
  • Humidity Control
    Variable speed motor combined with a Thermostat allows controlling the amount of humidity.
  • Quieter Operation
    Variable speed blower motor are significantly quieter thanits single-speed counterpart.
• Air Cooled Refrigerated System - Air cooled refrigeration system offer various benefits like
  
  • low fan power consumption
  • resistant to corrosion and freezing conditions
  • requires very low maintenance
  • Guaranteed long life operation
• PCRC Sheet Body - Powder coated steel body assures corrosion resistant chamber and allows working of chamber at high temperature applications.

Product Details:

Aging Chamber has been designed to simulate environmental condition to test the stability and reliability of products under stressed environment. Weiber is a leading manufacturer and supplier of Aging Test Chamber in India and abroad. Weiber offers scientific equipments at the most economical rates and versatile design. Microprocessor based Aging Test Chambers are made in accordance with the international testing standards. The equipments are NABL, NSF certified and CE approved. Aging Chamber maintains 25% to 95 % RH. The Test Chamber is digitally controlled delivering accurate result under controlled environmental conditions. This chamber also known as Accelerated Ageing Test Chamber.

Standard Features:

• Excellent quality magnetic gum packing
• Stainless steel chamber
• Temperature Uniformity
• Natural Air Flow
• Special plates mounted on the side walls to absorb heat
• Exterior painted with highly reflective, environmentally friendly, high temperature baked white powder coating.
• Colour touch panel.
• HMI+PLC in one unit
• Door open and Door close alarm system.
• Inbuilt calibration system.
• Separate Inbuilt printer for printing graphs(optional).
• CFC FREE REFRIGERATION UNIT
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber - Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Vewing Window - Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Circulation Fan with Variable Speed -
  
  • Electrical Efficiency
    Variable speed motor saves money by reducing energy bills, as it consumes less electricity than conventional motor.
  • Cooling Efficiency
    Variable speed enables gaining air conditioning efficiency or SEER.
  • Air Quality
    Variable speed motor helps clean the air efficiently. When the fan is in constant operation (indicated by the "Fan" setting on thermostat), the motor continues to slowly circulate air, allowing filters to capture more contaminants.
  • Humidity Control
    Variable speed motor combined with a Thermostat allows controlling the amount of humidity.
  • Quieter Operation
    Variable speed blower motor are significantly quieter thanits single-speed counterpart.
• Air Cooled Refrigerated System - Air cooled refrigeration system offer various benefits like
  
  • low fan power consumption
  • resistant to corrosion and freezing conditions
  • requires very low maintenance
  • Guaranteed long life operation
• PCRC Sheet Body - Powder coated steel body assures corrosion resistant chamber and allows working of chamber at high temperature applications.
• Digital Output – Target and Performance Output of the chamber operations are in digital format(digits) giving precise reading.
• Pre - Attached Data Logger with Data Analysis Software - Primary benefits of using data loggers is to automatically collect data 24-hour basis.Graph and table format of results can be produced automatically by the data logging software.

Product Details:

Aging Chamber has been designed to simulate environmental condition to test the stability and reliability of products under stressed environment. Weiber is a leading manufacturer and supplier of Aging Test Chamber in India and abroad. Weiber offers scientific equipments at the most economical rates and versatile design. Microprocessor based Aging Test Chambers are made in accordance with the international testing standards. The equipments are NABL, NSF certified and CE approved. Aging Chamber maintains 25% to 95 % RH. The Test Chamber is digitally controlled delivering accurate result under controlled environmental conditions.

Aplicable Standards:

• ASTM D6521-13
• ASTM D3045-92(2010)
• ASTM D1149-07 (2012)
• ASTM D5427-09 (2014)
• ASTM D 3611-06 (2011)
• ASTM E2141-14
• ISO 5630-3

Sailent Features:

• Excellent quality magnetic gum packing
• Stainless steel chamber
• Polyurethane Foam insulation between chambers to reduce thermal loss
• Temperature Uniformity
• Natural Air Flow
• Special plates mounted on the side walls to absorb heat
• Exterior painted with highly reflective, environmentally friendly, high temperature baked white powder coating.
• Colour touch panel.
• HMI+PLC in one unit
• Door open and Door close alarm system.
• Inbuilt calibration system.
• Separate Inbuilt printer for printing graphs(optional).
• CFC Free Refrigerationh Unit:
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber - Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Vewing Window - Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Circulation Fan with Variable Speed -
  
  • Electrical efficiency
    Variable speed motor saves money by reducing energy bills, as it consumes less electricity than conventional motor.
  • Cooling Efficiency
    Variable speed enables gaining air conditioning efficiency or SEER.
  • Air Quality
    Variable speed motor helps clean the air efficiently. When the fan is in constant operation (indicated by the "Fan" setting on thermostat), the motor continues to slowly circulate air, allowing filters to capture more contaminants.
  • Humidity Control
    Variable speed motor combined with a Thermostat allows controlling the amount of humidity.
  • Quieter Operation
    Variable speed blower motor are significantly quieter thanits single-speed counterpart.
• Air Cooled Refrigerated System - Air cooled refrigeration system offer various benefits like
  
  • low fan power consumption
  • resistant to corrosion and freezing conditions
  • requires very low maintenance
  • Guaranteed long life operation
• PCRC Sheet Body - Powder coated steel body assures corrosion resistant chamber and allows working of chamber at high temperature applications.
• Digital Output – Target and Performance Output of the chamber operations are in digital format(digits) giving precise reading.
• Pre - Attached Data Logger with Data Analysis Software - Primary benefits of using data loggers is to automatically collect data 24-hour basis.Graph and table format of results can be produced automatically by the data logging software.

Product Details:

Weiber Altitude Test Chamber combine temperature and altitude to test basic components or subassemblies designed for use in a variety of industries. With altitude test chambers, user can control the temperature environment for testing while simulating various altitudes from site level to 10,400 meters (25kPa). Altitude testing may be continued without temperature control up to 600,000 meters (0.1 kPa).

High Low Temperature Altitude Test Chamber is used to test temperature and low-pressure altitude conditions simultaneously. Two common applications of High Low Humidity Altitude Test Chamber are testing of avionics or other aerospace equipment to simulate actual conditions, and simulate high-altitude conditions found in mountainous regions or other regions. All models are factory tested, with an ergonomic and maintenance cum user-friendly design. These CE approved test chambers are created with multi-layered insulation with double vapour barrier is of low 'K' factor, high density and of non-hygroscopic in nature. Weiber test chamber are made in accordance with the international standard. Weiber Test Chambers are GMP complaints and are also ISO and NABL certified.

Standard Features:

• Touch Screen Controller is designed to save chamber programming and setup time. Removable USB I-stick simplifies access to profile, and audit trail files
• RS-232/485 serial communications offer a selection of communications options
• Easy Operation - Automatic temperature, and altitude control offer ease of use
• Safety Devices - A variety of electronic, refrigeration, and cabinet safeties are incorporated into the design, protecting both your product and chamber
• Reliable Performance - High quality components, and proven chamber design provide many years of trouble-free operation
• Dual Purpose - Operates as an altitude chamber and separate temperature chamber maximizing your investment
• Robust Vacuum System - High quality capacity vacuum pumps provide reliable performance. Flexible section in vacuum lines also prevents transmission of adverse vibration

Product Details:

For aim of reduced CO2 emissions and recovering braking energy lithium ion batteries have proved to be most suitable instrument. Developments are being made to make Li-ion battery for used as standard storage devices in HEV (Hybrid Electric Vehicles and PHEV (Plug in hybrid electric vehicles). The Chamber also known as Battery Test Chamber and Li Ion Battery Test Chamber.

WEIBER is able to offer both standard and customized solution for verifying the quality of batteries. Tests on batteries can generate potentially hazardous situations as they are carried out by simulating the limit conditions that may occur by transfer of energy from battery.

To handle and solve these problems our Lithium Ion Battery Test Chamber are equipped with necessary instruments for dangerous monitoring conditions like:

• Smoke sensors.

• Dangerous gas sensors

• Inerting system

• Flame extinguishing system

• Vapour removal system.

• Each battery test chamber is built according to specific test requirements and may be interfaced with battery cyclers, control and monitoring data acquisition system and other test equipment’s.

Standards:

• UL 1642 - Standard for Lithium Batteries
• UL 2054 - Household and Commercial Batteries
• IEC 62133 - Safety requirements for portable sealed secondary cells
• IEC 62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
• SAE J2464 - Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS)